Can anyone tell me what this pipe is supposed to go to and form. It is pluggen underneath the thermostat housing and in the back of the motor is has nothing on the end of the pipe. It is bolted down to the valve cover and to the thermostat in the front and to the head in the back. I tried looking in the caps for the part but couldn't find it.

<a href="http://photobucket.com" target="_blank"><img src="" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>

hard vac line for the emmisions EVAP canister underneath the passenger front bumper. also connects to the 3 pronged vac port on the back of the intake manifold.

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

if you were driving a 95 you wouldn't have it!

well that is quite interesting. the car is a '95. any way to tell what year the motor came out of??

That's one piece NOT going back on after i get the new head!!

Mine's a 96 and it has that hard line.

Mike D
-------------------------------------------------------------------------------------------------

also i searched the forum for a resistor mod for the evap system and didn't find one. Anyone ever looked into it??

I have seen 95's with the vac line.

maybe it's cause i have a pre 95 build, I threw that thing away when I bought Trickee's 97 motor off him, nothing to hook it up to