Well guys here it is finally after months and months of talking about it. We finally got a prototype set on our shop car and were going to be doing some real world testing not to mention some dyno pulls to see how these will hold up. These will be machined with a nicer design and be available in different color options. Thought we would give you a sneek peek to see what your thoughts were on them! Enjoy

www.cimotorsports.net

hells yah, whats pojected time till production>?

We would like to have them ready for the end of this month. We are sending 5 sets to selected customers for real world testing. Once they check back in ok were going full speed on production.

www.cimotorsports.net

I know I'm new here but can you explain? Hmm mabey I should go out and search, but I would hope I'm just up to early and this one should be easy to figure out.

RedLineInc07 what are you talking about? lol im confused now!

www.cimotorsports.net

I think he doesn't quite get the idea of how they work.
basically redline the larger your drive pulley in relation to the crank pulley, the slower your accessories are going to spin thereby creating less parasitic drag on your motor, aka more freed up horsepower, and also side benefits like your power steering gets a bit stiffer it's similar to an underdrive pulley on your crank, make the crank pulley smaller and you spin the accessories slower, simple rotating ratios

I'd really be interested in the powersteering pulley, I drove my friends gs recently with the unorthodox underdrive and his steering felt a bit tighter, I have yet to put mine on, but i like very stiff steering

umm...just remove the power steering, it's overrated

-Xavier-
95 Eclipse RS-T...lost in the frozen tundra

I'm going to be frank,

I think it looks stupid in the engine bay, especially the single nut holding it on. And secondly, for what?

1 hp?

or 4?

How much will something like this cost?

Are you saying this mod replaces an underdrive pully or should/can be combined with and underdrive.

Is it going to be dyno tested? (i see you did say this )

Well that's all I have to say about that.

I eat emo kids for breakfast

1995 Eagle Talon (SOLD)
72' SuperBeetle
72' Standard Beetle
56' Deluxe Beetle

Originally posted by Blizare
I'm going to be frank, I think it looks stupid in the engine bay, especially the single nut holding it on. And secondly, for what? 1 hp? or 4? How much will something like this cost? Are you saying this mod replaces an underdrive pully or should/can be combined with and underdrive. Is it going to be dyno tested? (i see you did say this ) Well that's all I have to say about that.

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

Originally posted by bullettdsm

Originally posted by Blizare I'm going to be frank, I think it looks stupid in the engine bay, especially the single nut holding it on. And secondly, for what? 1 hp? or 4? How much will something like this cost? Are you saying this mod replaces an underdrive pully or should/can be combined with and underdrive. Is it going to be dyno tested? (i see you did say this ) Well that's all I have to say about that.

Geez, Bliz, agreeing with you is like taking a prostate exam. I don't like it but I gotta do it . I hate to be negative but, you're right on this one, IMO.

-MIKE-

Stroked 2.2L

It might be worthwhile to simply make replacement pullies which are anodized for the show cars. Perhaps lighten them a little bit with some additional holes through the center (if they will not lose integrity) and then market them as a look pretty mod...

Ive had an aluminum overdrive alternator pulley since 2000

Member # 751


FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for

you guys do realize that the pics are of the prototypes? the caption states that they will be finished and machined nicer, or do i just read more than most?

-MIKE-

Stroked 2.2L

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

I edited to the wiki!

I'd definitely get one if it was cut like the centers of our cam gears are, it would definitely cut some rotating mass. Any bit helps.

Now if I can only find the Unorthodox UDP that's not on backorder.

__________________________________
-Ryan

-Keith

'92 BMW 325i - 3.91 LSD....Cold air intake....M52 headers.....Track pipe....Remus back....Fan Delete....UUC short throw...M3 Clutch Flywheel & Drive Shaft...Tien Coil overs

I <3 the twisties

Hey, I have an idea.

Let's beat the crap out of anyone who is trying to make items for the NT crowd. That way they will think twice about it the next time we ask for something.


Wait. We already did that.

We will build you bigger and stronger


Wake up and drive my ass... More like wake up and fix it.

If the opposite of Pro is Con
then the opposite of Progress is Congress

Remember guys, they said it was a prototype. Not necessarily a finished product. Give it a chance.

Jason|1997 Eclipse RS

I contributed to the wiki!

happy p'ple

Oh dont worry were going to cut some holes in those pulley sets once they are finished up being tested and whatnot, didnt think anyone would have such negetive feedback for a part that doesnt exist yet, but either way they should be rolling of the line for sale sometime by the end of this month, anything looks better then the stock power steering pulley if you ask me..

www.cimotorsports.net

You have any idea how much it will underdrive the accessories? Cause the UDP is already 30ish%, how much will they be decreased by this?

And if I just wanted the PS pulley, would I have to buy the whole set, or could I buy it separate?

Jason|1997 Eclipse RS

I contributed to the wiki!

happy p'ple

The pulleys are 20% larger and were designed with the use of the stock crank pulley seeing that it retains the harmoonic dampner, This would be a addition for those of you not looking to remove your stock crank pulley. Im not sure about selling them individually but i think it will be a posibility depending on the demand we get on them

www.cimotorsports.net

Jason|1997 Eclipse RS

I contributed to the wiki!

happy p'ple

I would assume so, not sure yet as we havent tested the alternator output with the use of both our alternator pulley and a underdrive crank pulley, same with the ps pulley

www.cimotorsports.net

Replacement aluminum anodized p/s and a/c pullys would sell way better in my opinion....