|
Hey welcome to the site, again. Just thought I would post up a mod list of what it takes to derive some power NA:
Inside: JE 10.5 Crower 2 cams Stainless valves .020 off head 5 angle valve job Personal port and polish (intake and exhaust) MLS Head gasket Of course, full rebuild on bearing etc. (stock) Full float wrist pins
Outside: AF/X pulley AF/X ECU Jeep 60 mm TB Personal port and polish intake 1 adj. cam gear on intake side E-bay Ram air intake Catch can E-bay 4-1 header (cleaned up with grinder) "hi-flow cat" 2.5 exhaust No power steering /AC Honda "race" radiator - rice a roni Integra battery - rice a roni Summit heat wrap
Suspension; tiens and adj KYB's (1.8 drop) in front stock springs adj KYB in back
ERT LSD Spec stage 2 NON modular clutch - Yuk
Believe it or not (minus the LSD and clutch), I got all these parts for less than $2500 (I added it up somewhere on dsmtuners). Now, all the work was done by me and I found used deals on some parts. BUT, I would love to have you get the NA feeling! (my set-up beats the stocker turbos FWD and AWD on the track) The biggest problem that you are going to run into is the tuning. The 97 allows for an "race" ECU. But it is only for the 97. You would have to go with another kind of tuner. MSnS seems to be the choice for most our members cars.
As stated earlier, spend a bunch of time searching. It will answer many questions and educate you about the choices of our engines.
MB
And sorry guys (Corey/Jason) not me Captain Caveman
96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq 97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq 98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats 99 OZ 5sp Stocker 15.856 @ 85.97 99 GS stocker auto 17.7@77mph!
wiki home page:http://www.2gnt.com/index.php?d=bullettdsm
|