I'm currently trying to put bigger injectors on my car and ran into a problem. At first I was going to run some Denso 660cc on an afc, sfmu,etc... and i found out that they wouldn't work. Well I bought some dsm blue top 450cc so that they would work, and when I recieved them they were designed differently. My stock injectors and the Denso injectors are similar in design with the longer petruding nose on the side that mount towards the combustion chamber. But the blue tops are more of a stubbier shape that doesn't have a long nozzle on it. I tried matching the stockers,660cc's, and 450cc's next to each other in a different injector port on my Int. manifold and like I said the 660's and stockers matched up, but the blue tops didn't position the nozzle as far in as the others. My question is will the 450's mount correctly on a 2gnt eclipse rs-t or do I have to find others with the same design as the stock ones. I'm in a bind with very little time, so any help would be deeply appreciated.
#101200, "RE: Confused with Injectors" In response to Reply # 3
if they are dsm injectors you need to run a resistor pack, Mods: CAI, OBX exhaust, Grillcraft grills, altezzas, ard ryver g6 17's wrapped w/ falken's, VIS racing c.f hood, 2 12" kicker comp's w/pioneer h.u, streetglow blue undercars, red dash kit, indiglo guages, n other shit
#101202, "RE: Confused with Injectors" In response to Reply # 0
Originally posted by BoostedEclipse I'm currently trying to put bigger injectors on my car and ran into a problem. At first I was going to run some Denso 660cc on an afc, sfmu,etc... and i found out that they wouldn't work. Well I bought some dsm blue top 450cc so that they would work, and when I recieved them they were designed differently. My stock injectors and the Denso injectors are similar in design with the longer petruding nose on the side that mount towards the combustion chamber. But the blue tops are more of a stubbier shape that doesn't have a long nozzle on it. I tried matching the stockers,660cc's, and 450cc's next to each other in a different injector port on my Int. manifold and like I said the 660's and stockers matched up, but the blue tops didn't position the nozzle as far in as the others. My question is will the 450's mount correctly on a 2gnt eclipse rs-t or do I have to find others with the same design as the stock ones. I'm in a bind with very little time, so any help would be deeply appreciated.
450's? Definately from another dsm. You need a resistor pack for those to work right, I got rc 440's over the others just because of less hassel.
Search
Printer-friendly copy
1 User in Chat
