Welcome to the 2GNT Forum! Interested In Advertising with 2GNT?
Home | Site Background| Info&Specs| Mods & Tech Info | CAPS | Part Reviews | Donate | 2GNT Stickers |
Search Printer-friendly copy 3 Users in Chat
Top 2GNT Technical Performance/Engine Manual Trans - NV-T350 topic #7979
View in linear mode

Subject: "installin fidanza alum flywheel" Previous topic | Next topic
rshisslerJun-30-09 02:14 AM
Member since Sep 15th 2008
172 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#7979, "installin fidanza alum flywheel"


          

K so if you look about 5 threads down my tranny exploded on me. Well since i have it all apart and ready for the new trans i figured i'd install my alum flywheel. I went on their site to see if they had torque specs listed and they dont but there is a note that says 96 and up need to use the 95 clutch and flywheel mounting bolts. Anyone know the part number for them or atleast what size/thread pitch i need.

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic
RE: installin fidanza alum flywheel, Moderatorteklein, Jun-30-09 04:56 AM, #1
RE: installin fidanza alum flywheel, ModeratorCorbin, Jun-30-09 10:26 AM, #2
      RE: installin fidanza alum flywheel, rshissler, Jun-30-09 02:18 PM, #3
           RE: installin fidanza alum flywheel, Moderatorbullettdsm, Jun-30-09 03:23 PM, #4
                RE: installin fidanza alum flywheel, rshissler, Jun-30-09 03:43 PM, #5
                     RE: installin fidanza alum flywheel, rshissler, Jun-30-09 11:03 PM, #6
                          RE: installin fidanza alum flywheel, Moderatorbullettdsm, Jul-01-09 01:53 PM, #7
                               RE: installin fidanza alum flywheel, rshissler, Jul-01-09 08:29 PM, #8
                                    RE: installin fidanza alum flywheel, Moderatorbullettdsm, Jul-02-09 10:53 AM, #9
                                         RE: installin fidanza alum flywheel, rshissler, Jul-02-09 08:09 PM, #10
                                              RE: installin fidanza alum flywheel, rshissler, Jul-02-09 09:19 PM, #11
                                                   RE: installin fidanza alum flywheel, rshissler, Jul-02-09 10:50 PM, #12
                                                        RE: installin fidanza alum flywheel, Moderatorbullettdsm, Jul-03-09 03:17 AM, #13
                                                             RE: installin fidanza alum flywheel, rshissler, Jul-03-09 08:15 PM, #14

ModeratortekleinJun-30-09 04:56 AM
Member since Nov 04th 2007
1699 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list facebook
#7980, "RE: installin fidanza alum flywheel"
In response to Reply # 0

          

I do not know the part numbers for them, but any Dodge dealer should be able to help you out.

Also, you have a non modular clutch correct?

Because that is what it means by 95 clutch and bolts.

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
ModeratorCorbinJun-30-09 10:26 AM
Donating 2GNT member
2552 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#7983, "RE: installin fidanza alum flywheel"
In response to Reply # 1
 Jun-30-09 10:27 AM by Corbin

          

You do need a longer bolt, since the non-mod flywheel is thicker than the modular flexplate. The part number is 6503464 and you need 8. I think they come pre-coated with blue loc-tite. I don't know the torque at the moment.

Corbin
'95 ESI-T

Now with more power and fewer leaks



Humble servant of the Wiki

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
rshisslerJun-30-09 02:18 PM
Member since Sep 15th 2008
172 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#7988, "RE: installin fidanza alum flywheel"
In response to Reply # 2
 Jun-30-09 02:50 PM by rshissler

          

ok i reread it and i looked up the wrong plate sorry guys. in installin the modualer palte onto the cluth set up. like i had to drill out the rivets and then the flywheel bolts onto the pressure plate. Only problem im hving now is that im using the stock pressure plate and the findaza flywheel has these little knobs on the flywheel that i think are suppost to slide into holes on the pressure plate but they dont line up there like 1mm off each. Would it be ok to drill out the holes alittle wider so that the knobs fit in right.

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
ModeratorbullettdsmJun-30-09 03:23 PM
Donating 2GNT member
2676 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#7989, "RE: installin fidanza alum flywheel"
In response to Reply # 3

          

Originally posted by rshissler
Would it be ok to drill out the holes alittle wider so that the knobs fit in right.

Yup, just be careful when you bolt/rivet you modular together. You want to maintain alignment.

Is there a reason why you are putting an old stock PP back on? How many miles on it?

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
rshisslerJun-30-09 03:43 PM
Member since Sep 15th 2008
172 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#7990, "RE: installin fidanza alum flywheel"
In response to Reply # 4
 Jun-30-09 04:55 PM by rshissler

          

has around 10k on it. looks like new yet. Now heres the new problem. when i put the PP ontop of the flywheel and bolt it down theres a 3-5mm gap between the clutch and the PP. WTF! Guess they weren't design to be used with the stock crap

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                    
rshisslerJun-30-09 11:03 PM
Member since Sep 15th 2008
172 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#7996, "RE: installin fidanza alum flywheel"
In response to Reply # 5

          

Do you think if i buy just a PP from Spec it would work then? Can you buy just the PP from spec or any company for a modualer set uop?

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                        
ModeratorbullettdsmJul-01-09 01:53 PM
Donating 2GNT member
2676 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#7997, "RE: installin fidanza alum flywheel"
In response to Reply # 6

          

So you got a non modular flywheel then? I'm just a little lost......

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                            
rshisslerJul-01-09 08:29 PM
Member since Sep 15th 2008
172 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#7998, "RE: installin fidanza alum flywheel"
In response to Reply # 7

          

when i bought the flywheel i was told it was the flywheel from a spec clutch modualer set-up. So im thinkin that the spec pressure plate isn't has high as the stock pressure plate. So i wanna see if i can order just the pressure plate from their modualer set up

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                
ModeratorbullettdsmJul-02-09 10:53 AM
Donating 2GNT member
2676 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#7999, "RE: installin fidanza alum flywheel"
In response to Reply # 8
 Jul-02-09 10:53 AM by bullettdsm

          

Originally posted by rshissler
when i bought the flywheel i was told it was the flywheel from a spec clutch modualer set-up. So im thinkin that the spec pressure plate isn't has high as the stock pressure plate. So i wanna see if i can order just the pressure plate from their modualer set up

Well.....first off, my opinion/experience of Spec is extremely low. With that being said, I would find it a bit strange that they would alter dimensions for a modular set-up. But I guess its possible. I'm thinking your best bet (besides getting something else ), would be to call Spec directly.

BTW, the flywheel you have, does not have any teeth on it right?

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                    
rshisslerJul-02-09 08:09 PM
Member since Sep 15th 2008
172 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#8000, "RE: installin fidanza alum flywheel"
In response to Reply # 9

          

yea it really doesn't make sense to me either. I realy dont understand why the stock pressure plate wouldn't work on the aftermarket flywheel. I mean wouldn't you think that aftermarket plates be designed after the stock one just made stronger?
Heres the Flywheel:

looks just like the stock flywheel but its got little lip on each side that the flywheel bolts too and that makes the flywheel thicker.

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                        
rshisslerJul-02-09 09:19 PM
Member since Sep 15th 2008
172 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#8002, "RE: installin fidanza alum flywheel"
In response to Reply # 10

          

after searching around i found this post:
http://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=1479&mode=full

It says that the fidanza needs to be milled down becuase the steps are to high any more info on this?

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                            
rshisslerJul-02-09 10:50 PM
Member since Sep 15th 2008
172 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#8003, "RE: installin fidanza alum flywheel"
In response to Reply # 11

          

ok so now i found out that this flywheel bolts onto the flexplate then uses a 95 neon clutch set up lol confusing.

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                                
ModeratorbullettdsmJul-03-09 03:17 AM
Donating 2GNT member
2676 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#8004, "RE: installin fidanza alum flywheel"
In response to Reply # 12
 Jul-03-09 03:17 AM by bullettdsm

          

Originally posted by rshissler
ok so now i found out that this flywheel bolts onto the flexplate then uses a 95 neon clutch set up lol confusing.

The pic does help me understand. Its a modular. So Spec makes a modular flywheel that makes you buy non modular parts with it. Uh...ok, lol.

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                                                    
rshisslerJul-03-09 08:15 PM
Member since Sep 15th 2008
172 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#8009, "RE: installin fidanza alum flywheel"
In response to Reply # 13

          

yea its fuckin werid. The Fidazna web site even reads "Must use 95 style clutch and pressure plate"

  
Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Performance/Engine Manual Trans - NV-T350 topic #7979 Previous topic | Next topic
   

Powered by DCForum+ Version 1.2
Copyright 1997-2003 DCScripts.com

I generated this page in 0.049471855163574 seconds, executing 14 queries.