2GNT.com Forums - Viewing topic - Rear Main & New Clutch

Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers

Printer-friendly copy

0 Users in Chat

Performance/Engine

Manual Trans - NV-T350

topic #7870

View in linear mode

Subject: "Rear Main & New Clutch"

Previous topic | Next topic

Nisshoku81	May-20-09 10:09 PM
Member since Nov 11th 2007 174 posts,

#7870, "Rear Main & New Clutch"

Hey guys, I'm getting ready to have my rear main seal done because I just can't take it anymore and now that my clutch slipping, I have no choice but to fix it promptly. My car is going to maintain being a daily driver with a few mods here and there. I have no plans on passing 200 hp if I even make that. Should I got with the Rally Kit HD Stage 1 clutch or the TZ Kit Stage 2 clutch from South Bend Clutch? I'm leaning toward Stage 1 but I'm not 100% sure if that's the right move. Any advice would be greatly appreciated. Thanks.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

RE: Rear Main & New Clutch, Tuxdreamerx, May-20-09 11:27 PM, #1

RE: Rear Main & New Clutch, Moderator

Moderator

bullettdsm, May-21-09 01:32 PM, #2

RE: Rear Main & New Clutch, Babbz413, May-21-09 02:43 PM, #3

RE: Rear Main & New Clutch, keislij, May-22-09 01:28 PM, #4

RE: Rear Main & New Clutch, Nisshoku81, May-22-09 11:59 PM, #5

RE: Rear Main & New Clutch, keislij, May-23-09 02:35 AM, #6

RE: Rear Main & New Clutch, Nisshoku81, Jul-02-09 10:05 PM, #7

RE: Rear Main & New Clutch, Moderator

Moderator

bullettdsm, Jul-03-09 04:23 AM, #8

RE: Rear Main & New Clutch, Nisshoku81, Jul-03-09 06:11 AM, #9

RE: Rear Main & New Clutch, 420agreenvilleSC, Jul-03-09 01:41 PM, #10

RE: Rear Main & New Clutch, Nisshoku81, Jul-03-09 05:58 PM, #11

RE: Rear Main & New Clutch, Nisshoku81, Jul-08-09 12:09 AM, #12

RE: Rear Main & New Clutch, Nisshoku81, Jul-13-09 08:22 PM, #13

RE: Rear Main & New Clutch, Tuxdreamerx, Jul-14-09 11:26 AM, #14

RE: Rear Main & New Clutch, Moderator

Moderator

bullettdsm, Jul-14-09 01:04 PM, #15

RE: Rear Main & New Clutch, Nisshoku81, Jul-14-09 04:39 PM, #16

RE: Rear Main & New Clutch, Nisshoku81, Jul-14-09 04:37 PM, #17

RE: Rear Main & New Clutch, Nisshoku81, Jul-14-09 11:48 PM, #18

RE: Rear Main & New Clutch, Moderator

Moderator

bullettdsm, Jul-15-09 07:10 AM, #19

RE: Rear Main & New Clutch, Nisshoku81, Jul-15-09 11:46 AM, #20

RE: Rear Main & New Clutch, Moderator

Moderator

bullettdsm, Jul-17-09 07:57 PM, #21

RE: Rear Main & New Clutch, RoninEclipse2G, Jul-18-09 10:00 AM, #22

RE: Rear Main & New Clutch, Nisshoku81, Jul-19-09 07:35 AM, #23

Tuxdreamerx	May-20-09 11:27 PM
Donating 2GNT member 384 posts,

#7871, "RE: Rear Main & New Clutch"
In response to Reply # 0

Honestly this is the clutch I got and its amazing. I have a bit done to my engine too. http://cgi.ebay.com/ebaymotors/F1-RACING-STAGE-1-CLUTCH-KIT-95-MITSUBISHI-ECLIPSE-GS_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem5189c228ddQQitemZ350203554013QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_2595wt_790

IMO any stage 1 clutch would do. That clutch I linked to is rated for 230hp.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

bullettdsm	May-21-09 01:32 PM
Donating 2GNT member 2676 posts,

#7876, "RE: Rear Main & New Clutch"
In response to Reply # 1

+1 for the F-1 (or the PT Cruiser).

For $200 will hold any NA application. I'm running it right now with the daily (5k on it) no problems.

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Babbz413	May-21-09 02:43 PM
Member since Mar 18th 2009 260 posts,

#7877, "RE: Rear Main & New Clutch"
In response to Reply # 2

+2 for the f1 racing clutch. just installed mine 3 weeks ago.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

keislij	May-22-09 01:28 PM
Member since Nov 26th 2008 46 posts,

#7880, "RE: Rear Main & New Clutch"
In response to Reply # 3

+3 for the f1. I just installed it a few weeks ago and havent had a problem with it since. Ive got a CAI, UDP, catback exhaust, a 60MM TB, and a venom Intake Manifold. It seems to hold really well, I haven't had a slip yet. Im not sure what hp im putting out, but that gives you a general idea of what its handling for me.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Nisshoku81	May-22-09 11:59 PM
Member since Nov 11th 2007 174 posts,

#7882, "RE: Rear Main & New Clutch"
In response to Reply # 4

Thanks everyone. I guess I will be taking a look at the F1. The shop will do the Rear Main Seal and the Cluch for me for $300.00.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

keislij	May-23-09 02:35 AM
Member since Nov 26th 2008 46 posts,

#7883, "RE: Rear Main & New Clutch"
In response to Reply # 5

that sounds about right. good luck with it, I dont think you will be disappointed.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Nisshoku81	Jul-02-09 10:05 PM
Member since Nov 11th 2007 174 posts,

#8001, "RE: Rear Main & New Clutch"
In response to Reply # 6

Hey guys, I finally purchased the clutch. I can't wait to get this baby in. I'm really questioning if I can just do the install myself? What do you think guys?

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

bullettdsm	Jul-03-09 04:23 AM
Donating 2GNT member 2676 posts,

#8005, "RE: Rear Main & New Clutch"
In response to Reply # 7

Yes you can. Here's a write up in the Wiki that I did on removal;

http://www.2gnt.com/index.php?d=Removing%20your%20transmission

Just to give you an idea of what it takes. Obviously, you just need to take your flexplate off for the rear main seal.

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Nisshoku81	Jul-03-09 06:11 AM
Member since Nov 11th 2007 174 posts,

#8006, "RE: Rear Main & New Clutch"
In response to Reply # 8

Originally posted by bullettdsm
Yes you can. Here's a write up in the Wiki that I did on removal; http://www.2gnt.com/index.php?d=Removing%20your%20transmission Just to give you an idea of what it takes. Obviously, you just need to take your flexplate off for the rear main seal.

Wow that seems like a difficult job. I guess I have to learn sooner or later.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

420agreenvilleSC	Jul-03-09 01:41 PM
Donating 2GNT member 1527 posts,

#8007, "RE: Rear Main & New Clutch"
In response to Reply # 9

if you have any questions, feel free. Its pie. not bad at all.

___________________________________________

http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Nisshoku81	Jul-03-09 05:58 PM
Member since Nov 11th 2007 174 posts,

#8008, "RE: Rear Main & New Clutch"
In response to Reply # 10

It seems pretty straight forward. I'm more concerned about actually getting the tranny out. How heavy is it?

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Nisshoku81	Jul-08-09 12:09 AM
Member since Nov 11th 2007 174 posts,

#8018, "RE: Rear Main & New Clutch"
In response to Reply # 11

Isn't it a beauty! I can't wait to install this on Monday!

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Nisshoku81	Jul-13-09 08:22 PM
Member since Nov 11th 2007 174 posts,

#8026, "RE: Rear Main & New Clutch"
In response to Reply # 12

Originally posted by Nisshoku81
Isn't it a beauty! I can't wait to install this on Monday!

Hey. I wanted to tell everyone that I finally installed the clutch, and the rear main seal. It's not as hard as I thought it would although the tranny was heavy. I wanted to say thanks to everyone in here who recommended me the F1 clutch. Also BulllettDSM and 420agreenvilleSC, I couldn't have done with without your help!

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Tuxdreamerx	Jul-14-09 11:26 AM
Donating 2GNT member 384 posts,

#8027, "RE: Rear Main & New Clutch"
In response to Reply # 13

Glad your happy. Have you driven it yet? Do you like the clutch?

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

bullettdsm	Jul-14-09 01:04 PM
Donating 2GNT member 2676 posts,

#8028, "RE: Rear Main & New Clutch"
In response to Reply # 14

Just FYI, I pounded the crap out of mine on the track this past weekend. Held like glue. No problems since either.

Glad to hear you got her done yourself.

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Nisshoku81	Jul-14-09 04:39 PM
Member since Nov 11th 2007 174 posts,

#8030, "RE: Rear Main & New Clutch"
In response to Reply # 15

Originally posted by bullettdsm
Just FYI, I pounded the crap out of mine on the track this past weekend. Held like glue. No problems since either. Glad to hear you got her done yourself.

Thanks. I like what I'm feeling so far although I can feel a little vibration in the pedal but I heard that's always the case on a new clutch.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Nisshoku81	Jul-14-09 04:37 PM
Member since Nov 11th 2007 174 posts,

#8029, "RE: Rear Main & New Clutch"
In response to Reply # 14

Originally posted by Tuxdreamerx
Glad your happy. Have you driven it yet? Do you like the clutch?

Yes I've been driving it lately. Trying to get that 500 miles break in. The clutch pedal feels so light but you can feel it grab immediately. Good stuff.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Nisshoku81	Jul-14-09 11:48 PM
Member since Nov 11th 2007 174 posts,

#8031, "RE: Rear Main & New Clutch"
In response to Reply # 17

Btw, I'm noticing the shifter has been getting really touch to switch. Is this normal with the breakend period?

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

bullettdsm	Jul-15-09 07:10 AM
Donating 2GNT member 2676 posts,

#8033, "RE: Rear Main & New Clutch"
In response to Reply # 18

Originally posted by Nisshoku81
Btw, I'm noticing the shifter has been getting really touch to switch.

Tough? If so, how so?

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Nisshoku81	Jul-15-09 11:46 AM
Member since Nov 11th 2007 174 posts,

#8035, "RE: Rear Main & New Clutch"
In response to Reply # 19

Well it feels like sometimes it's just hard to put into gears. It will always go in but not easily sometimes. It's the kind of feeling you get when the clutch fluid is empty. The clutch fluid is full with new fluid, and the transmission has 2 quarts of fluid. I haven't seen any leaks so it should still have 2 quarts lol. On the brighter note, my rear main is not leaking anymore, thank god!

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

bullettdsm	Jul-17-09 07:57 PM
Donating 2GNT member 2676 posts,

#8050, "RE: Rear Main & New Clutch"
In response to Reply # 20

Originally posted by Nisshoku81
It's the kind of feeling you get when the clutch fluid is empty. The clutch fluid is full with new fluid,

Makes me wonder if you caught a little air in the system when you did the tranny. It may need to be bled and sometimes it is tricky getting that last air bubble out (though I honestly haven't had that problem yet).

Also check to be sure that the horseshoe clips are on completely and correctly (sometimes they get put on crooked). And look at the bushings on the tranny to see if they are sloppy.

Plus the clutch will feel lighter than stock (as you noticed). Normal.

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

RoninEclipse2G	Jul-18-09 10:00 AM
Donating 2GNT member 2745 posts,

#8052, "RE: Rear Main & New Clutch"
In response to Reply # 21
Jul-18-09 10:01 AM by RoninEclipse2G

Mark pretty much hit the nail on the head with what to check. Personally I'd bet the horseshoe clips need to be pounded back into place or replaced entirely. Sometimes you can reuse them 5-10 times, sometimes they won't hold again after the first time that they've been removed emoji It seems to vary from car to car

Erik P.
Official 2GNT thread Hijacker
Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be...
All we know is, He's not The Stig... But he is The Stig's Spartan cousin!

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Nisshoku81	Jul-19-09 07:35 AM
Member since Nov 11th 2007 174 posts,

#8056, "RE: Rear Main & New Clutch"
In response to Reply # 22
Jul-19-09 07:35 AM by Nisshoku81

Ok for the last few days the shifting has been normal. It's very easy to get into gear and very smooth. I checked the clips and they are fine. I also bled the system right after the install. Kind of a strange scenerio but all is well now and i'm loving it!

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Top

Performance/Engine

Manual Trans - NV-T350

topic #7870

Previous topic | Next topic

Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com

Generated in 0.031 seconds, executing 62 queries.