so i bought this flywheel off ebay and i jsut got it in today. Looking at it i noticed its missing 2 things. Heres pics
No ring gear for the starter and no center section to bolt to the crank. Guy said its a alumin flywheel for a modular clutch and the plate has been retrofitted by Fidanza to use the removable/replaceable surface plate.
Can these peices be bought from fidanza or what should i do?
#7629, "RE: fidanza flywheel missing stuff?" In response to Reply # 1
This is the answer i got from the guy when i asked him about it "It is for the Modular setup that is all one piece. The auction and ad had this explained. The setup was for the origional setup on a 420A eclipse/talon."
#7630, "RE: fidanza flywheel missing stuff?" In response to Reply # 2
Originally posted by rshissler This is the answer i got from the guy when i asked him about it "It is for the Modular setup that is all one piece. The auction and ad had this explained. The setup was for the origional setup on a 420A eclipse/talon."
Modular clutch = pre-assembled kit, includes pressure plate, clutch and flywheel in a kit. The modular clutch bolts up to the flex plate. The flex plated bolts to the crankshaft and has the teeth for the starter. What you received is CORRECT. The factory modular clutch is riveted with no bolts, so dissasembly has to be done by drilling or cutting the rivets. What clutch will you be planing to run?
#7649, "RE: fidanza flywheel missing stuff?" In response to Reply # 4
ya, looks like its missing some stuff. Gotta watch ebay. There's some stupid people on there that don't know anything about cars. Exactly why i just make sure i wont get screwed and just pay a little extra more for something new with warranty and no run arounds. Depends on the price though, if you got it cheap enough, maybe i would've bought it to
Originally posted by bullettdsm Recommendations are that you get drunk and sit idly by to stare at your car while nothing happens to it. End results seem to be that you will be happy.
#7654, "RE: fidanza flywheel missing stuff?" In response to Reply # 5
This is the right flywheel for our cars. You just received the flywheel of the modular clutch kit. Now you need to buy the clutch disk and the pressure plate. Don't worry about the teeths or the holes of the crank, these are on the flex plate that is installed on your car. The big four bolts on the back of your new flywheel are use to bolt the flywheel to the flex plate.
Search
Printer-friendly copy
2 Users in Chat
