First time posting at the forums here. I hope you all can help me regarding a problem I'm having with my shifter. I was taking an exit ramp and in the process of downshifting into fourth, the shifter became "dead," and could not be engaged into any of the gears, resulting in me being on the side of the road. The shifter had play in all directions with no resistance other than left and right (because of the coil at the base of the shifter). In other words, the shifter had the range of motion where it would be in the right gears, but would not stay there.

I've looked endlessly online and could not find someone who has experienced the same problem. I did check underneath the shifter console and could not find any snapped rods or loose connections. I had someone move the shifter while I looked at the shifter arms about the transmission move, but nothing seemed to engage.

Is there any way to see if the problem is related to the gearbox, transmission, shifter cables, etc? I would like to know if there is a way to engage into the gears by using the shifter arms about the transmission, thus troubleshooting whether or not it truly is the shifter cables or not. Please guide me step by step as I'm not too experienced with tranny-work, but willing to learn.

Thanks in advance

Look on top of the trans, where the shifter cables connect to it. they are only help on with cotter pins. one might have broken, resulting in your loose and non functional shifter.

** Current status: 9 bent valves. and it only had 6,000 miles on it. i hope the replacement goes well. **

Lots of expensive parts, and still slow! Oh wait, it has to run to go fast.

My Wiki Page: www.2gnt.com/index.php?d=red96rs>

from 2g chat
* DarkOne joins 2GNT_Chat
‹DarkOne› .
‹DarkOne› wow... i'm drunk
‹DarkOne› at 9am.
‹DarkOne› on a saturday.