Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 1 User in Chat
Top 2GNT Technical Performance/Engine Manual Trans - NV-T350 topic #6938
View in linear mode

Subject: "rebuilt 3.55 tanked on me...question" Previous topic | Next topic
JungyJan-31-08 08:04 AM
Member since Nov 09th 2005
164 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#6938, "rebuilt 3.55 tanked on me...question"


          

Ok so I have a rebuilt 3.55 w/ a quaife lsd, not very many miles on it since it was rebuilt. The night I was parking my car for the winter This fall I stopped at the gas station my buddy works at to say hi, well I pull into the parking lot in first and I push the clutch in and stop and go to back into a spot. I put it in reverse and let the clutch out and it doesn't make a sound or move at all. The next day I trailer it back to my house and check it out as much as I can w/o dropping the tranny. It goes into all the gears smooth and when I let out the clutch the rpm's drop a little so its engaging. The car rolls while in gear so I'm assuming that maybe the output shaft broke? what do you guys think? I moved and am going to school right now so the car is stored at my mom's house so I haven't had a chance to drop the tranny and check her out.



96' eclipse gs, 2gb conversion
built bottom end, crane #16 cams, hx40 pro billet, MS1 v3 MSn'S-E, 3.55 trans, quaife lsd

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

AdministratorStar Turbo TalonJan-31-08 11:32 PM
Member since Oct 21st 2003
8331 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#6942, "RE: rebuilt 3.55 tanked on me...question"
In response to Reply # 0




          

check for broken axle or axles first. If a shaft in the trans snapped, you would have some ungodly aweful noise when you engaged the clutch

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
JungyFeb-01-08 02:25 AM
Member since Nov 09th 2005
164 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#6943, "RE: rebuilt 3.55 tanked on me...question"
In response to Reply # 1


          

I hope an axle didn't break, they are DSS stage 2's but I will definitely check!



96' eclipse gs, 2gb conversion
built bottom end, crane #16 cams, hx40 pro billet, MS1 v3 MSn'S-E, 3.55 trans, quaife lsd

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
JungyFeb-17-08 02:15 PM
Member since Nov 09th 2005
164 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#6994, "RE: rebuilt 3.55 tanked on me...question"
In response to Reply # 2


          

Well i was able to drop the tranny this weekend and see what went out on me, the axles are perfect and the clutch is good. I stuck my finger in the holes for the axles and feel all kinds of metal shavings in the diff, this is not good! So I destroyed my quaife lsd, does anyone have any experiance with the warranty through quaife? I know it has a limit ed lifetime warranty.



96' eclipse gs, 2gb conversion
built bottom end, crane #16 cams, hx40 pro billet, MS1 v3 MSn'S-E, 3.55 trans, quaife lsd

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
ModeratorbullettdsmFeb-18-08 08:11 AM
Donating 2GNT member
2676 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#6995, "RE: rebuilt 3.55 tanked on me...question"
In response to Reply # 3


          

Originally posted by Jungy
So I destroyed my quaife lsd, does anyone have any experiance with the warranty through quaife? I know it has a limit ed lifetime warranty.

Well that's good news (though hard to do. Are you sure it's the Quaife?). Quaife backs up their LSD's 100%. I know of two that went down and they were replaced without a question. The general concensus is that you can go right ahead and beat the crap out of your Quaife, because if anything goes wrong, they will replace it.

Now, with the disclaimer of you need to have oil in there etc., lol

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
JungyFeb-18-08 03:59 PM
Member since Nov 09th 2005
164 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#6996, "RE: rebuilt 3.55 tanked on me...question"
In response to Reply # 4


          

Yepp I am absolutely positive its a quaife, baxsom bought it from horsepowerfreaks.com after trying to install an obx with no luck. I emailed quaife today, I haven't heard back but I will keep you posted.



96' eclipse gs, 2gb conversion
built bottom end, crane #16 cams, hx40 pro billet, MS1 v3 MSn'S-E, 3.55 trans, quaife lsd

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Performance/Engine Manual Trans - NV-T350 topic #6938 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.024 seconds, executing 26 queries.