Aright, so i changed my clutch, and bled the clutch system and all... actually quite a few times. And every time i do it, i'll pump it, and have a bit of pressure to the pedal, but a few pumps later, i'll go back to absolutly no pressure whatsoever. I mean, it feels like i'm pressin my gas pedal. I can still shift throught the gears and dis-engage the clutch with no problems, but still, i have no pedal pressure... what should i do / look for / etc..

Oh, btw, no leaks anywhere (that i can see)

this a new clutch, spec ? i have a spec stage 5 and i feel little pressure.

Brand new clutches always feel like that. it'll get better.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

what? hang on... there is NO pressure... like I said, its easier to push than my gas pedal... when i bleed the system, it gets some pressure, but no more than 5 or so pumps and i'm back to zero pressure... so you're saying its just gonna get better? or am i TOTALLY misunderstanding

you need to check and re check for leaks, your situation isnt making sence. check the master.