What all do i need to do to put the sohc neon tranny in i heard about people putting it in and my tranny is all messed so i am just going to replace it but a neon tranny is so much cheaper thanks everyone.
#3721, "RE: Putting Neon Tranny in" In response to Reply # 0
At minimum, you need the 2GNT bellhousing and the 2GNT shift select levers.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#3747, "RE: Putting Neon Tranny in" In response to Reply # 1
Originally posted by DarkOne At minimum, you need the 2GNT bellhousing and the 2GNT shift select levers.
you say at a minimum, what else could be needed. I have an '02 neon trans w/a cracked bellhousing just waiting to get put in. I figured new driveshaft seals, TO bearing, and clutch. any other suggestions? thanks
----------- '96 Eclipse GS '94 Talon TSi AWD www.SOVADSM.com
#3756, "RE: Putting Neon Tranny in" In response to Reply # 2
Dino is referring to anyting damaged on your trans. SOHC will require bellhousing (obviously you said it was cracked) shift levers on top. seals are good to get. You will need anyting you break in the process, mounts, bolts, speed sensor if yours is bad or the SOHC didnt come with one at all you will need the speedo gear. if you break the output shaft bearing you will need that, if any seals are leakign you will need those. Get the Idea?
Search
Printer-friendly copy
2 Users in Chat
