#3088, "Trans locked up when put back together???/"
I just got my retro fit diff back and put it all back together and it will spin freely in nutrul and in gear it is locked up but i put my clutch on it and spun it but the diff did not spin. Anyone have anyidea.
#3089, "RE: Trans locked up when put back together???/" In response to Reply # 0
I'm having trouble understanding exactly what the problem is you're describing.
It spins free in nuetral. You put the clutch on it and spun it, and the diff didn't spin. Sounds like its in neutral. What's the problem?
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#3092, "RE: Trans locked up when put back together???/" In response to Reply # 2
If you have the trans sitting upright, it will be very hard to turn, as all the synchros are working like brakes on the gears. If you lay it down on its side it should ease up.
Depending on which gear you out it in and how much you turned the clutch, the rotation might not have been noticable. Lay it on its side, throw it in first, and give it a shot that way.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#3098, "RE: Trans locked up when put back together???/" In response to Reply # 4
ok thanks i will try that is was sitting how it should be but i will put u back together and try it. I could turn the output shaft but the diff didn't spin. so i will try it tomarrow after work.
#3106, "RE: Trans locked up when put back together???/" In response to Reply # 5
I put my retrofit back in about a week ago and already have the tranny mounted up the engine. Everything seems to spinning just fine. As long as you put everything back in correctly (which is little hard to mess up) what your describing seems fine to me. You put the ring gear in correctly right? It has a slight taper to it.
Search
Printer-friendly copy
1 User in Chat
