Everyone says that you can go from modular to non modular by getting a neon flywheel and clutch to replace the stock. My question however is that the neon flywheel I have is a 6 bolt crank pattern while the stock flexplate I believe on the 97 420A is an 8 bolt pattern. Now my question is whether I have the completely wrong flywheel or whether there is overlap in the holes to the point where the 6 bolt pattern flywheel will still overlap some of the 8 bolt holes and bolt right up. Please help out. Thanks

If it has 6 bolts, then you have the wrong flywheel...All neons have the 420A, same crank..I believe it has 7 bolts for the crank if i remember right...could be wrong, but its def more than 6..

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

All 420A cars have an 8 bolt main.

_________________________________________
I'm the guy that bans you for breaking the rules. I am the troll killer. I am the law here.