#914, "Confuzed... What goes with this?" Jun-29-03 03:51 AM by thegame
Ok. Im confuzed yet once again. haha. Im looking for a clutch, flywheel and some kind of lsd (probably phantom grip).
Im probably going to get the clutchmasters stage 4 clutch (modular), so what will work with it????
Fidanza flywheel - do I get the one for the 95-99 eagle talon non-turbo? OR the 95-99 neon?
Phantom grip lsd - do I get the one for the 95-01 neon/avenger/stratus? Should I get the diff saver? Should I get the upgraded spring kit?
Where did u order these from? Someone that has these or knows about them, please let me know. I want to buy these things soon. I wanted to make sure I get the right ones. Thanks.
#916, "RE: Confuzed... What goes with this?" In response to Reply # 1 Jun-29-03 12:48 PM by thegame
Wow. Soooooooo confuzed now. I think if I just read something right, I cant get a flywheel if I use a modular clutch?? For the love of god.... can someone explain this to me? AAAHHHHH!!!! haha
#918, "RE: Confuzed... What goes with this?" In response to Reply # 2
when u have a modular clutch the flywheel is conected to the clutch so u need to order a clutch for a 95 neon "non moduluar" and a flywheel for a 95 neon "non modular" i have the phantom grip and got the race tunning package u will need to take it to someone to put it in. and the phantom grip should be 904 gold i think double check before u go to install that they sent u the right one. also get the safing brakets atleast to save the pin also i think u need to trim the top off of them so they dont hit ur speed sensor. I also replaced the smaller pin that holds in the dif. pin. The new pin i got was better made and i think there is less chance of it break. also make sure u get the tranny fluid for ur transmission or trannies r very picky so if u us the wrong stuff it will cause problems. Its expensive but its what u have to use
#919, "RE: Confuzed... What goes with this?" In response to Reply # 4
If you get a mod clutch, that's all you need, but if you want to upgrade and get a lighter flywheel, you need to go non-mod conversion route. Simplest thing to do is order the CM replacement clutch for our car which will be modular (then, no need to order flywheel). The phantom grip (or whatever you choose to get) is independent and doesn't depend on what type of clutch you have. Hope that clears up any confusion I may have caused.
#925, "RE: Confuzed... What goes with this?" In response to Reply # 5
Our clutches are Modular. This means that the whole clutch assembly is rivited together, and uses a separate plate bolted to the clutch assembly called a flexplate, or drive plate. This plate has the teeth on it for the starter to catch and crank the motor. On non-modular clutches, the flywheel part of the clutch, is bolted, not rivited to the pressure plate, and these flywheels have the starter teeth on them, so no flexplate is used. Clutchmasters has direct bolt on modular clutches you can buy, that retain using the flexplate, BUT you cant replace the clutch disk, because the whole unit is rivited together. Some want to use a non modular setup, so they can replace the clutch disk when it wears. The 95 Neon's use a non mod setup, so you can get a flywheel from it(it has the starter teeth on it), and get a upgraded pressure plate and clutch disk, and then bolt it all together.
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)