So i want to change my stock modular clutch setup to a non-modular clutch setup because the clutch needs replacing and i wanted to know if this would work.

Flywheel: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=140267707639&ih=004&category=33732&_trksid=p4506.m7&_trkparms=algo%3DLVI%26its%3DK%252BD%26otn%3D3%26ps%3D5#ebayphotohosting

"Question" For this flywheel do i need to buy the 95 Dodge Neon Bolts that are stated in the "Non Modular VS Modular Clutch" post from bulletdsm.


http://www.2gnt.com/index.php?d=Non%20Modular%20VS%20Modular%20Clutch


Clutch Kit: http://www.autopartswarehouse.com/details/QQMitsubishiQQEclipseQQACTQQClutch_KitQQ19902006QQA85MB1HDSS.html

and if you could possible send me links to other clutch kits that may work that are less then $350 or even $300 and should be of good quality.

Also let me know what you think of the flywheel and clutch combination i have listed above well thats if the combination would work ofcourse.

Yes the flywheel will work and you will need to get the flywheel to crank bolts from a 95 neon.

The clutch you listed will not work. its for a 4g63.

Listed in the Compatibility Info of the clutch kit it says its compatible with "1996-1999: 4Cyl 2.0L "Gas, FI, MFI, 122, VIN "Y", 420A" GS " Im guessing that would be a mistake on their end? Prob so well then i guess ima have to find a clutch kit for a 95 Dodge Neon too unless i want to try and figure out how to do this Audi pressure plate setup. If you know of any kits that would work with that flywheel please send some links.

Clutch kit for less than $350,

http://www.ultrarev.com/product.php?productid=34944

Must use flywheel from a Neon.

http://www.ultrarev.com/product.php?productid=31313

Total cost: ~$700.

Go with either a stock clutch setup or MB's write-up for the Audi clutch setup if you want to go non-modular.

My Blog

thanks man that clutch kit looks solid, that would be a non-modular clutch setup right seeing that the flywheel isnt attached to the clutch. if so thats prob what i want.