I have a 420A. Tranny is removed and there are bolts in the back of the flywheel and can not get them out. Im putting in an Exedy stage 2 clutch in. Just need a little help. Thanks
#4788, "RE: How do I remove my clucth?" In response to Reply # 0
I use a six-side 18mm wrench and a hammer, personally.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#4791, "RE: How do I remove my clucth?" In response to Reply # 1
Yeah man hit them with the wd-40 or PB blaster and let it eat for a while, then get the above items with a breaker bar if you have it and go to town, they will come out, I promice you that one way or another they will come out.
I edited to the wiki!
Originally posted by DR1665 NOTE TO SELF: Go commando to wedding. Scar the Irishman for life.
