Hey,
I was driving today and I was in fifth and I went to downshift to 4th but my clutch felt weird and the car did't shift into gear, all of sudden there was no pressure in my clutch pedal so I had to pull over. My car would not go into gear and the slave cylinder wasn't moving at all and there is no pressure to the pedal. What happened and how can it be fixed. Thanks

You have a hydralic problem. Either the master, slave, or the rubber line has a leak.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

Yeah, good news, it ain't no thing to fix.

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

Thanks for the peplies guys, so what I should do take both cylinders apart and check out that everything is fine? Because right now I don't know which one went or if it was both. THanks

Just look for leaks. If there is fluid inside the boot of the master or slave cylinder, it's leaking and should be rebuilt or replaced. If both of them are dry, inspect the rubber hose by the ECU, see if it's split.. if that's not it, it may be clutch related, but my bet is on the hydralics.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

what he said. ^^^^^

Built 420a
NER turbo kit T3/T04s ball bearing
AFX UDP
Crane 0014 cams