Im parting out a boost build. The car had about 5000 miles on the Build.



Parts:

- Pan (no rust) with welded -10AN Return -50
- Fulidyine AL radiator 300
- MSD DIS2 with plug and play harness -250
- Hahn Port fueler, Stg 5, with Data logging -500
- Aeromotive 1:1 FPR -70
- Hahn Log (Ceramic coated-Jet hot)
- Hahn S20G, Just rebuilt and balanced with a billet wheel -500 (comes with -3An feed and -10 Return - less than 300 miles on rebuild)
- Hahn Eliminator 3" Vband Down Pipe (tapped for Wide band) -225
- Hahn FMIC -300
- GSX Front and rear Calipers (Powder coated Red) Rear and front dust shields Powder coated black - 300
- Tein SS Coilovers -450
- mpx 60mm Throttle body 100
- Ported and Powder coated (black) Intake manifold 50
- Poly Motor mounts, and inserts, with Powder coated Pass Mount (Front mount also Large bolt moddified) -100
- Stock T stat Powder coated Black -25
- HKS BOV (unsure if its knock off) -25
-AEM Wide band Uego -100 (New sensor ~500 miles ago)
-AEM Coolant temp (AEM Part Number 30-4402) -100
- Ed peters OBX LSD. This was literally just put in the trans about 200 Miles ago. -425

Let me know. I will get picks up soon.
Location, Iowa.

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid

I might take the turbo off your hands.can you send pics to 954.901.9588 and how much to ship it to 33317.PM

Is the DIS the programmable one with the boost retard?

Ill get pics up asap. Tearing down the car this week.

And I will check on your MSD question

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid

Kool, I will look at it to night. I know its got timing retard, Launch control, the plug and play coil harness and Tach adapter.

I will be taking the car apart over this week, and I will get Pics and the additional parts posted up. thanks!

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid

Wow. A lot of my parts on that car. I can attest to the quality. Many of the components were just coated and rebuilt.

GLWS - sucks to see the car being parted out already.

If I still had my 420a, I'd be buying most of this stuff up.

95 Avenger 2.0 - Hahn 16g, DMS 8 injector setup, UDP, Big FMIC, HKS SSQV, MSD Coil & Wires,
ZEX Nitrous System, QTP Cut Out, Mandrel 2.5" Exhaust with cat delete, MP 60mm TB...and tons of Carbon Fiber

Flaminelipse - MSD pn is 62112
Comes with an additional Plug and play harness for the Coil pack
Has Launch control feature as well.
Also has an MSD 8912 tach adapter\.

Pics to come.

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid

yes it will?
Thats exactly what we used it for..
It will retard timing per RPM and also has Launch control.

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid

Heres Some Pics:
MP 60 MM TB, Less than 1000 Miles on it (comes with TPS, but not IAC)
http://s16.photobucket.com/user/glowryder/media/20130807_211608_resized_zpsd8e5133b.jpg.html>

HKS BOV(not sure if its real or not?). Comes with adapter Pipe 25$
http://s16.photobucket.com/user/glowryder/media/20130807_211837_zps856d8dd4.jpg.html>
http://s16.photobucket.com/user/glowryder/media/20130807_211857_resized_zpseaff8a08.jpg.html>

Hahn Log. It was recently plained via CNC (500 miles ago)
http://s16.photobucket.com/user/glowryder/media/20130807_211753_zps5ccb7d40.jpg.html>
http://s16.photobucket.com/user/glowryder/media/20130807_211738_resized_zpsc43ef784.jpg.html>

MSD 6211
Allows for timing retard and launch control. Also comes with tach adapter and plug and play harness for Coil interception
http://s16.photobucket.com/user/glowryder/media/20130807_211437_resized_zpsad5b71f1.jpg.html>
http://s16.photobucket.com/user/glowryder/media/20130807_211427_resized_1_zps622f45a2.jpg.html>

Hahn FMIC
http://s16.photobucket.com/user/glowryder/media/20130807_211353_resized_zps8a7cdd1e.jpg.html>
http://s16.photobucket.com/user/glowryder/media/20130807_211338_resized_zps95df76c7.jpg.html>

Ported IM. PC's black. Matched to TB. comes with injectors and rail.
http://s16.photobucket.com/user/glowryder/media/20130807_211708_resized_zps1b5a44f0.jpg.html>
http://s16.photobucket.com/user/glowryder/media/20130807_211639_resized_zps2fe1806f.jpg.html>
http://s16.photobucket.com/user/glowryder/media/20130807_211630_resized_zps888cddc3.jpg.html>

Hahn Stg 5 Port fueler. The EIC is purchased new in December, and has the upgraded data Acquisition. Also comes with a few -4 AN fuel lines.
http://s16.photobucket.com/user/glowryder/media/20130807_211405_resized_zpsdbf13d71.jpg.html>
http://s16.photobucket.com/user/glowryder/media/20130807_2114130_resized_zps34643eac.jpg.html>

Missing link and FCD.
http://s16.photobucket.com/user/glowryder/media/20130807_211508_resized_zps9d0befb8.jpg.html>

More to come as I take parts off.

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid

So many good parts. I really need to go the portfueler route but I've enjoyed not having to work on anything in my engine bay for several years.

2gnt: '99 RS-T, killed by a toyota, pending rebuild...
Daily: Volt
Daily #2: '99 EVG ebike- STOLEN by PEDRO

GSX front and rear Calipers. Powder coated red. With pads (have about 1000 miles) Also has rear backing plates powder coated black.
http://s16.photobucket.com/user/glowryder/media/2013-01-26_16-18-56_270_zps3d64836f.jpg.html>
250+ ship and applicable fees

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid

You have PM.

95 GS Boosted

have pm'd you back

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid

http://s16.photobucket.com/user/glowryder/media/IMG_20130809_195035_660_zpse75fb5d2.jpg.html>
http://s16.photobucket.com/user/glowryder/media/IMG_20130809_195030_255_zpsdfe9c675.jpg.html>

http://s16.photobucket.com/user/glowryder/media/IMG_20130809_194743_748_zps48a8f148.jpg.html>
http://s16.photobucket.com/user/glowryder/media/IMG_20130809_194732_838_zpseaf53493.jpg.html>

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid

have you gotten my pm's? I dont want to miss out on the parts I want

Due to over whelming interest in the Wide band, It will be sold to who ever pmd first. if that person does not have the funds, it will move on to thee next person with interest. I will let you know via PM which standing you are guys.

MP 60mm SOLD

Sorry for the delay on pics.
http://s16.photobucket.com/user/glowryder/media/IMG_20130809_202309_138_zps7498f4cb.jpg.html>

http://s16.photobucket.com/user/glowryder/media/IMG_20130810_182354_256_zps10d21de1.jpg.html>
http://s16.photobucket.com/user/glowryder/media/IMG_20130810_182331_813_zps5a151fa2.jpg.html>

http://s16.photobucket.com/user/glowryder/media/IMG_20130810_183034_689_zps1e13e26d.jpg.html>

http://s16.photobucket.com/user/glowryder/media/IMG_20130810_182223_185_zpscea32dc9.jpg.html>

http://s16.photobucket.com/user/glowryder/media/IMG_20130810_182211_060_zps91a09f96.jpg.html>

http://s16.photobucket.com/user/glowryder/media/IMG_20130809_202309_138_zps7498f4cb.jpg.html>

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid

Pan- Junked
Down Pipe-Sold
60mm TB Sold.
Mounts and Poly's -sold
FCD+ML- sold
cluster gauge pod -sold
Wideband-sold
FPR-Junked

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid

BOV-pending
Fluidyne Rad - Pending
Hahn Mani-Peding
Ported IM-Pending
Hahn IC-pending

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid

Info on clutch and how much ?

Status- Need to do break-in...



Try not to challenge me, I'd rather tie up than lose. Either way you NEVER WIN.... - Me..

Purchased new in July 2013, installed mid July along with LSD. its a spec 4 with a 6 puck. has less than 500 miles (if even that :/)

400 USD +ship and paypal fees.

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid

ED peters Modded OBX LSD
pics up
http://s16.photobucket.com/user/glowryder/media/IMG_20130813_201017_546_zps712170f9.jpg.html>
http://s16.photobucket.com/user/glowryder/media/IMG_20130813_201002_642_zps8d5ef1ce.jpg.html>
http://s16.photobucket.com/user/glowryder/media/IMG_20130813_200954_725_zps0e9e68fb.jpg.html>
http://s16.photobucket.com/user/glowryder/media/IMG_20130813_200939_713_zpsa55156b9.jpg.html>

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid

Sold/Not avail
Pan- Junked
60mm TB Sold.
Mounts and Poly's -sold
FCD+ML- sold
cluster gauge pod -sold
Wideband-sold
FPR-Junked
BOV-Sold
OBX cam gears
Wide band


Pending
Down Pipe
Hahn FMIC
Hahn Log
Ported IM
Fluidyne Rad


Addtional things For Sale:
2 sets of ARP head studs - 75 for each set.

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid

LSD- Sold
Teins -Sold

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid

got my BOV today... great guy to deal with

Clutch Sold

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid