Welcome to the 2GNT Forum! Interested In Advertising with 2GNT?
Home | Site Background| Info&Specs| Mods & Tech Info | CAPS | Part Reviews | Donate | 2GNT Stickers |
Search Printer-friendly copy 0 Users in Chat
Top Team 2GNT Marketplace 2GNT Buy / Sell / Trade (BST) topic #116100
View in linear mode

Subject: "GI: '99 Partout. Many Upgrades. Let's try this again..." This topic is locked.
Previous topic | Next topic
devvinSep-22-09 12:16 PM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116100, "GI: '99 Partout. Many Upgrades. Let's try this again..."
Sep-23-09 08:22 AM by devvin



          

Hey folks. It's been a looong time since I posted, but I can explain. This spring I posted up a GI thread:

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=16&topic_id=114051&mode=full


Unfortunately in late May I was having extreme pain in my lower extremities; muscle weakness, sharp leg spasms etc. I went to my doctor, who ordered an MRI. I was diagnosed with a spinal cord tumor in my lower back. I had to have an emergeny surgery to try and remove it. Good news is that my neurosurgeon was able to get MOST of the tumor out. Bad news is that some of it is still attached to my spinal cord. Long story short, I was out of commission for the whole summer. I'm really lucky I guess. The situation could have been much worse.


I've recently started feeling back to normal and I managed to get a ton taken off of the Eclipse. I'm going to take some pictures when I get home from work today.


I want to say thanks to everyone for not flaming me when I stopped responding to pm's. It's been a rough time, but with luck, the part of the tumor that's still left won't cause me any trouble. (hopefully for a while anyway)

Feel free to PM me with any questions. Here are some of the parts I've got on the car:



Hahn turbo kit: super 20g (ceramic coated), manifold (ceramic coated), Large FMIC, all piping, oil feed/return lines, K&N air filter, FCD, Fuel pressure regulator, Walbro 255lph. (No downpipe included. I'm selling the 3" HRC Downpipe w/ the exhaust. $1800 + shipping

Hahn Portfueler: Mounting plate, Injectors, fuel rail, control module (set up for stage V), software. (No fuel pressure regulator) $650 +shipping

Thermal R&D 3" Turbo-back exhaust: 3" Hahn Eliminator downpipe, Hahn Hi-flo cat: $550 + shipping

Quaife LSD: will be sold with manual transmission. (local pickup only) $700 + shipping

Built bottom end: see signature for this. (local pickup only) $700 + shipping

Built head: see signature for this too. $550 + shipping

Cams: Crane #14 turbo-grind $175 + shipping

Fidanza adjustable cam gears: silver $120 + shipping

Fluidyne aluminum radiator: $250 + shipping

Flex-a-lite dual fans: $170 + shipping

Zeitronix ZT-2 Wideband w/lcd display: $250 + shipping

Greddy type RS blow off valve: $140 + shipping

Greddy Profec B Spec II electronic boost controller: $220 + shipping

MSD DIS 2 programmable ignition: with tach adapter and 3 bar map sensor. $400 + shipping

Greddy 60mm peak & hold A/F gauge: $185 + shipping

Greddy 60mm peak & hold EGT gauge: $130 + shipping

Greddy 60mm peak & hold Boost gauge: $120 + shipping

Greddy 52mm oil pressure gauge: $70 + shipping

Greddy 52mm fuel pressure gauge: $70 + shipping

Driveshaft shop stage 2 axles: 400hp $550 + shipping

Falken Torque 5 18" with Falken Azenis Sport RT-615 Tires 225/40/18 (less than 1000 miles on them) $530 + shipping

Missing Link: $30 + shipping

Modern Performance 60mm throttle body: $140 + shipping



I still haven't taken the block, tranny, and axels off, (my back isn't 100% yet) but with some help from one of my brothers, friends, or anyone else, I can get those out really soon. I got 90% of everything off of the car.

I'm sure I've forgotten some things, but I'll add more as they occur to me.

Thanks a lot guys.

Bryan


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

Replies to this topic
RE: GI: '99 Partout. Many Upgrades. Let's try this again..., Moderatorteklein, Sep-22-09 01:01 PM, #1
RE: GI: '99 Partout. Many Upgrades. Let's try this again..., twinvenges, Sep-22-09 02:16 PM, #2
      RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Sep-22-09 05:46 PM, #3
           RE: GI: '99 Partout. Many Upgrades. Let's try this again..., nicho919, Sep-22-09 08:01 PM, #4
           RE: GI: '99 Partout. Many Upgrades. Let's try this again..., Raine883, Sep-22-09 08:12 PM, #5
                RE: GI: '99 Partout. Many Upgrades. Let's try this again..., red95eclipse, Sep-22-09 08:50 PM, #6
                     RE: GI: '99 Partout. Many Upgrades. Let's try this again..., mysteryclipse21, Sep-22-09 10:40 PM, #7
                          RE: GI: '99 Partout. Many Upgrades. Let's try this again..., mreigle, Sep-23-09 04:43 AM, #8
                               RE: GI: '99 Partout. Many Upgrades. Let's try this again..., Moderatorcs82685, Sep-23-09 04:51 AM, #9
                                    RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Sep-23-09 07:01 AM, #10
                                         RE: GI: '99 Partout. Many Upgrades. Let's try this again..., Raine883, Sep-23-09 07:15 PM, #11
                                              RE: GI: '99 Partout. Many Upgrades. Let's try this again..., mreigle, Sep-24-09 06:44 AM, #12
                                                   RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Sep-24-09 08:04 AM, #13
                                                        RE: GI: '99 Partout. Many Upgrades. Let's try this again..., Raine883, Sep-24-09 10:05 AM, #14
                                                             RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Sep-24-09 12:10 PM, #15
                                                                  RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Sep-24-09 12:37 PM, #16
                                                                       RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Sep-25-09 10:08 AM, #17
RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Sep-25-09 01:41 PM, #18
RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Sep-29-09 01:16 PM, #19
      RE: GI: '99 Partout. Many Upgrades. Let's try this again..., highviewpunk, Sep-29-09 08:42 PM, #20
           RE: GI: '99 Partout. Many Upgrades. Let's try this again..., BoostedEclipse, Sep-30-09 05:23 PM, #21
                RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Oct-02-09 05:14 PM, #22
                     RE: GI: '99 Partout. Many Upgrades. Let's try this again..., mreigle, Oct-02-09 08:36 PM, #23
                          RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Oct-05-09 10:24 AM, #24
                               RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Oct-05-09 06:18 PM, #25
                                    RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Oct-08-09 06:51 PM, #26
                                         RE: GI: '99 Partout. Many Upgrades. Let's try this again..., wickedtalon, Oct-09-09 11:44 AM, #27
                                              RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Oct-09-09 12:25 PM, #28
                                                   RE: GI: '99 Partout. Many Upgrades. Let's try this again..., wickedtalon, Oct-09-09 01:20 PM, #29
                                                        RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Oct-09-09 01:29 PM, #30
RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Oct-12-09 07:43 AM, #31
RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Oct-12-09 08:03 AM, #32
RE: GI: '99 Partout. Many Upgrades. Let's try this again..., BoostedEclipse, Oct-15-09 04:57 PM, #33
RE: GI: '99 Partout. Many Upgrades. Let's try this again..., Black Cotton, Oct-18-09 03:27 PM, #34
      RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Oct-21-09 01:53 PM, #35
           RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Oct-25-09 02:21 PM, #36
                RE: GI: '99 Partout. Many Upgrades. Let's try this again..., Cyexmaster, Oct-25-09 03:09 PM, #37
RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Nov-22-09 09:33 AM, #38
RE: GI: '99 Partout. Many Upgrades. Let's try this again..., AdministratorCODE4, Nov-23-09 04:19 PM, #39
RE: GI: '99 Partout. Many Upgrades. Let's try this again..., AdministratorCODE4, Nov-26-09 08:52 PM, #41
RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Nov-26-09 10:25 AM, #40
      RE: GI: '99 Partout. Many Upgrades. Let's try this again..., Moderatorteklein, Nov-26-09 09:03 PM, #42
           RE: GI: '99 Partout. Many Upgrades. Let's try this again..., Jungy, Nov-30-09 10:20 AM, #43
                RE: GI: '99 Partout. Many Upgrades. Let's try this again..., devvin, Dec-03-09 08:20 PM, #44

ModeratortekleinSep-22-09 01:01 PM
Member since Nov 04th 2007
1699 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list facebook
#116101, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 0

          

PM sent on Modern TB.

  
Report This Post to Admin Printer-friendly copy | Top

    
twinvengesSep-22-09 02:16 PM
Member since Aug 25th 2007
74 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116102, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 1



          

hey whats up, i wanted to get some prices on the radiator/fan, and possibly the s20g.. i remember talking to you, but i dont have the old pms,, so hook me up with a price, thanx

  
Report This Post to Admin Printer-friendly copy | Top

        
devvinSep-22-09 05:46 PM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116106, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 2



          

PM's sent to both of you.


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

            
nicho919Sep-22-09 08:01 PM
Member since Apr 12th 2009
93 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116107, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 3

          

PM sent on bottom end.

I'm broke, it's broken. I'm broke because it's broken. It's broken because I'm broke.

Simplicity Car Club - Founding Member

  
Report This Post to Admin Printer-friendly copy | Top

            
Raine883Sep-22-09 08:12 PM
Member since Jul 17th 2009
49 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116109, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 3

          

can i get prices and pics for the exhaust,the portfueler, and the radiator?

Why did i turbo a 420a? Why is your 4g63 smoking in a ditch?

  
Report This Post to Admin Printer-friendly copy | Top

                
red95eclipseSep-22-09 08:50 PM
Member since Oct 07th 2008
59 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116111, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 5

          

Pmed

  
Report This Post to Admin Printer-friendly copy | Top

                    
mysteryclipse21Sep-22-09 10:40 PM
Member since Feb 22nd 2006
82 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116112, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 6



          

Pmed

__________________________________________
All that is necessary for evil to prevail is for good men to do nothing.- Edmund Burke

HRC Stage IV

  
Report This Post to Admin Printer-friendly copy | Top

                        
mreigleSep-23-09 04:43 AM
Member since Jun 21st 2006
426 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116113, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 7

          

I am interested in the throttle body. If you aren't getting what you think it is worth PM me.

  
Report This Post to Admin Printer-friendly copy | Top

                            
Moderatorcs82685Sep-23-09 04:51 AM
Donating 2GNT member
2007 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116114, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 8



          

not to bust your balls, but the rules say you need to put a price in your listing. Please edit your listing to include prices on at least most of the stuff. If you want to just copy and paste the list and put it in a new thread with prices that's fine then I'll lock this one.

Tim droppin the ball


I contributed to the Wiki!
EVO IX - just a really expensive boost gauge and a K&N air filter
96 Eclipse RS -awaiting registration and inspection
95 Eclipse GS - parts car
Mods/Profile - http://www.2gnt.com/index.php?d=cs82685

  
Report This Post to Admin Printer-friendly copy | Top

                                
devvinSep-23-09 07:01 AM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116115, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 9



          

Originally posted by cs82685
not to bust your balls, but the rules say you need to put a price in your listing. Please edit your listing to include prices on at least most of the stuff. If you want to just copy and paste the list and put it in a new thread with prices that's fine then I'll lock this one. Tim droppin the ball


Sorry about that. The original post has been edited with prices.


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

                                    
Raine883Sep-23-09 07:15 PM
Member since Jul 17th 2009
49 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116117, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 10

          

will you do 500 shipped for the radiator and wideband?

Why did i turbo a 420a? Why is your 4g63 smoking in a ditch?

  
Report This Post to Admin Printer-friendly copy | Top

                                        
mreigleSep-24-09 06:44 AM
Member since Jun 21st 2006
426 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116119, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 11

          

Still in for $140 on the throttle body if someone hasn't already agreed to it.

  
Report This Post to Admin Printer-friendly copy | Top

                                            
devvinSep-24-09 08:04 AM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116120, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 12



          

pm's sent to both of you.


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

                                                
Raine883Sep-24-09 10:05 AM
Member since Jul 17th 2009
49 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116122, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 13

          

im getting you pms, i may also be interested in the portfueler

Why did i turbo a 420a? Why is your 4g63 smoking in a ditch?

  
Report This Post to Admin Printer-friendly copy | Top

                                                    
devvinSep-24-09 12:10 PM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116123, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 14



          

Originally posted by Raine883
im getting you pms, i may also be interested in the portfueler


Cool man. Let me know.


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

                                                        
devvinSep-24-09 12:37 PM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116124, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 15



          

Forgot to mention; the Portfueler injectors are 500cc.

Also, if there's something that I didn't list, feel free to send me a pm and ask me about it. Thanks.


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

                                                            
devvinSep-25-09 10:08 AM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116133, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 16



          

All pm's answered.


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

devvinSep-25-09 01:41 PM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116135, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 0
 Sep-26-09 07:45 AM by devvin



          

Fluidyne Radiator SOLD

FAL fans SOLD

Zeitronix wideband SOLD

MP 60mm TB SOLD


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

    
devvinSep-29-09 01:16 PM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116156, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 18



          

Block, head, cams, cam gears, on hold until Friday.


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

        
highviewpunkSep-29-09 08:42 PM
Member since Sep 24th 2006
44 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116160, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 19

          

I WAS LOOKING FOR A BUILT BLOCK AND HEAD ABOUT 2 WEEKS AGO

HAD TO BUY A REBUILT ONE LOCALLY TO WORK ON

BUMP FOR THIS GUY

  
Report This Post to Admin Printer-friendly copy | Top

            
BoostedEclipseSep-30-09 05:23 PM
Donating 2GNT member
283 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116166, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 20

          

pm sent!

- 98 Eclipse rs turbo

  
Report This Post to Admin Printer-friendly copy | Top

                
devvinOct-02-09 05:14 PM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116179, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 21



          

Head SOLD

Block SOLD

Cams SOLD

Cam Gears SOLD


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

                    
mreigleOct-02-09 08:36 PM
Member since Jun 21st 2006
426 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116180, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 22

          

MP TB received

  
Report This Post to Admin Printer-friendly copy | Top

                        
devvinOct-05-09 10:24 AM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116201, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 23



          

Hey guys. I've decided to part the turbo kit out too. Here are the prices:

Hahn FMIC - $475 plus shipping (add $75 if you want the IC piping. The piping is powder coated maroon to match the car)

Hahn Super 20G w/15psi actuator (Ceramic coated) - $650 plus shipping

Hahn turbo manifold (Ceramic coated) - $475 plus shipping (it's tapped for an EGT gauge)

Walbro 255lph - $50 plus shipping

Aeromotive 1:1 fuel pressure regulator - $90 plus shipping

'99 rear spoiler (see sig. for pic) - $100 plus shipping

Quaife LSD: will be sold with manual transmission. (local pickup only) $700 + shipping (*** this didn't seem too clear after I re-read it. The quaife is installed in the tranny. It's a 5-spd.***)

I also forgot to mention that the MSD comes with the software.

Thanks guys.


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

                            
devvinOct-05-09 06:18 PM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116202, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 24



          

Portfueler, Exhaust, and Super 20g are on hold until Thursday evening.

The DSS axles have been taken off of the car now. Please pm me with any questions.


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

                                
devvinOct-08-09 06:51 PM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116222, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 25



          

Exhaust SOLD

Portfueler SOLD

Super 20g SOLD


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

                                    
wickedtalonOct-09-09 11:44 AM
Member since Jan 04th 2002
978 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116227, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 26

          

Originally posted by wickedtalon
Originally posted by devvin
Originally posted by wickedtalon
Originally posted by devvin
Originally posted by wickedtalon
Originally posted by devvin
Originally posted by wickedtalon
Interested in downpipe and exhaust. Let me know how much you'd be willing to part for.


The full turbo-back exhaust will be sold for $500 + shipping. It's the 3" downpipe with O2 bung, flex pipe, high-flow cat and 3"cat-back thermal R&D. I got it from Hahn.

Thanks,
Bryan


Sep 23rd 2009 I'll still take the exhaust now that you're back in action. Let me know how much shipping is to Cincinnati 45011. Thanks.

Jim


Cool. I'll weigh it when I get home and figure out the shipping costs. I'm afraid that the shipping might be expensive because of the size of the parts, but I'll let you know tonight.

Thanks

Bryan


Would you be able to email me a couple pics? jim@--.com I may consider a road trip but your about 8 hours from me so shipping would be prefered.


Sep 23rd 2009 No problem. I'll take some pics when I get home. The muffler has a dent in it. It's nothing visible when you're driving, but I want to give full disclosure. That's why I knocked the price down some. I'll email you the pics this evening, along with an estimate on shipping.


Oct 05th 2009 Did you get an estimate on shipping fo the exhaust?


Oct 05th 2009 Yeah man. I'm sorry. The UPS site is saying that it'll be around $160 to ship it. If you want it, we can call the shipping $160 and if it's less, I'll paypal you the difference. There is another guy who is saying he wants the exhaust too though. He hasn't said he's sending the payment yet, but he said he wants it. I guess it's just a matter of who pays for it first. I can ship it out tomorrow or Wednesday. Sorry I didn't get back to you with the shipping price. I thought that I did. Ugh, I'm sending too many pm's lately. haha.

Let me know man

Bryan



No reply on sending my payment.
What a dick move.

// Jim // 95 Talon / 99 Eclipse (sold)

Cincinnati,OH

  
Report This Post to Admin Printer-friendly copy | Top

                                        
devvinOct-09-09 12:25 PM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116230, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 27



          

That's uncalled for man. Someone else had already sent me a payment and I was waiting for it to clear. I'm sorry if I didn't respond fast enough for you. I have been straightforward and fair with everyone I've dealt with during this sale. Anyone who has purchased parts from me will vouch for that I'm sure. I don't appreciate this type of childishness in my thread. It's rude. You could have sent me a pm if you had a grievance with me. Not cool. Please don't clog this thread up with your unwarranted insults. I'm trying to sell parts from my car, not get into some forum argument. Thanks.


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

                                            
wickedtalonOct-09-09 01:20 PM
Member since Jan 04th 2002
978 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116232, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 28

          

I thought we were in process of transaction. Seriously. When someone says "I'll take it" they usually send cash once they have the total + shipping. I asked for shipping amount so I could send the cash to have it shipped. By the time you gave me shipping amount you've sold to someone else. Not cool.

// Jim // 95 Talon / 99 Eclipse (sold)

Cincinnati,OH

  
Report This Post to Admin Printer-friendly copy | Top

                                                
devvinOct-09-09 01:29 PM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116233, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 29



          

You said "I'll take it" about 3 hours after somebody had already sent me the payment. I understand that you're mad, but somebody else just beat you to it. I made you aware that someone else was interested in the exhaust. Please don't insinuate that I've been unfair. It's not correct.

That's it though. I'm not talking about this anymore.


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

devvinOct-12-09 07:43 AM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116259, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 0



          

Fuel Pressure Regulator - SOLD


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

devvinOct-12-09 08:03 AM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116260, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 0



          

Hey guys. I took some pictures today of some of the parts. I'll take more either tonight or tomorrow. The sale isn't limited to just what I have listed. If there is anything you want that I haven't listed, just send me a pm and we can figure it out.


Greddy type RS blow off valve: $140 + shipping


Greddy Profec B Spec II electronic boost controller: $220 + shipping


MSD DIS 2 programmable ignition: with tach adapter and 3 bar map sensor. $400 + shipping


Greddy 60mm peak & hold EGT gauge: $130 + shipping


Greddy 60mm peak & hold Boost gauge: $120 + shipping


Greddy 52mm oil pressure gauge: $70 + shipping


Greddy 52mm fuel pressure gauge: $70 + shipping


Missing Link: $30 + shipping


Intercooler piping: $75 + shipping


I'll photo the tranny, axles, wheels/tires, spoiler, tonight or tomorrow.

Thanks!


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

BoostedEclipseOct-15-09 04:57 PM
Donating 2GNT member
283 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116283, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 0

          

I just recieved my parts I purchased from devvin. Very impressed with his great description of the parts and his honesty during the transaction. I would recomeened buying from him to anyone!

- 98 Eclipse rs turbo

  
Report This Post to Admin Printer-friendly copy | Top

    
Black CottonOct-18-09 03:27 PM
Member since Oct 20th 2006
114 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116293, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 33

          

waitin on pics and price shipped to 06770 of axles. do these axles also come with the hubs or do these axles utalize OE hubs.

  
Report This Post to Admin Printer-friendly copy | Top

        
devvinOct-21-09 01:53 PM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116326, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 34



          

PM sent.


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

            
devvinOct-25-09 02:21 PM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116355, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 35



          

bump


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

                
CyexmasterOct-25-09 03:09 PM
Member since Nov 27th 2007
324 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116356, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 36



          

can you do a better price on the profec b? It can be found on ebay for 230 shipped (NEW)...

Status- Need to do break-in...



Try not to challenge me, I'd rather tie up than lose. Either way you NEVER WIN.... - Me..

  
Report This Post to Admin Printer-friendly copy | Top

devvinNov-22-09 09:33 AM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116527, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 0
 Nov-23-09 08:39 AM by devvin



          

Hey guys. Bump and updated prices.


Greddy type RS blow off valve: $100 + shipping


Greddy Profec B Spec II electronic boost controller: $150 + shipping


MSD DIS 2 programmable ignition: with tach adapter and 3 bar map sensor. $275 + shipping


Greddy 60mm peak & hold EGT gauge: $90 + shipping


Greddy 60mm peak & hold Boost gauge: $90 + shipping


Greddy 52mm oil pressure gauge: $40 + shipping


Greddy 52mm fuel pressure gauge: $40 + shipping


Missing Link: $20 + shipping

HRC FMIC: $300 + shipping



Intercooler piping: $55 + shipping


DSS Stage II axles (400hp): $350 + shipping


5spd Tranny with Quaife LSD. (local pickup only) $450


Falken Torque 5 18" with Falken Azenis Sport RT-615 Tires 225/40/18 (less than 1000 miles on them) $400 + shipping


'99 Rear Spoiler (gsx style): $75 + shipping.

I'll be taking the sideskirts off soon. Please let me know if there is anything not listed that you need. Thanks!


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

    
AdministratorCODE4Nov-23-09 04:19 PM
Member since Nov 23rd 2003
2552 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116534, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 38



          

PM'ed

---

2012 2500HD LML

  
Report This Post to Admin Printer-friendly copy | Top

        
AdministratorCODE4Nov-26-09 08:52 PM
Member since Nov 23rd 2003
2552 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116547, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 39



          

Originally posted by CODE4
PM'ed


Are you going to respond to my PM?

---

2012 2500HD LML

  
Report This Post to Admin Printer-friendly copy | Top

    
devvinNov-26-09 10:25 AM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116546, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 38



          

Transmission sold.

MSD and axles on hold until Monday.


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

        
ModeratortekleinNov-26-09 09:03 PM
Member since Nov 04th 2007
1699 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list facebook
#116548, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 40
 Nov-27-09 04:30 AM by teklein

          

PM'd regarding gauge pillar pods and stock cluster.

  
Report This Post to Admin Printer-friendly copy | Top

            
JungyNov-30-09 10:20 AM
Member since Nov 09th 2005
164 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116572, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 42

          

PM sent.



96' eclipse gs, 2gb conversion
built bottom end, crane #16 cams, hx40 pro billet, MS1 v3 MSn'S-E, 3.55 trans, quaife lsd

  
Report This Post to Admin Printer-friendly copy | Top

                
devvinDec-03-09 08:20 PM
Member since Mar 18th 2004
64 posts, 		Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#116595, "RE: GI: '99 Partout. Many Upgrades. Let's try this again..."
In response to Reply # 43



          

DSS axles - SOLD

MSD DIS 2 - SOLD

Greddy boost gauge - SOLD

Greddy EGT gauge - SOLD


'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859


Originally posted by thedawg
Get the goddamn fucking right plugs and set the goddamn fucking right gap. Maybe throw in a goddamn fucking stock coil pack, and read the goddamn fucking chiltons.

  
Report This Post to Admin Printer-friendly copy | Top

Top Team 2GNT Marketplace 2GNT Buy / Sell / Trade (BST) topic #116100 Previous topic | Next topic
   

Powered by DCForum+ Version 1.2
Copyright 1997-2003 DCScripts.com

I generated this page in 0.18078899383545 seconds, executing 12 queries.