someone should make up some braces that are Y shaped on either end and adjustable in the center to slip in between the rear member and control arm to make a "solid" rear for FWD drag cars. any opinions? Todd?
#2404, "RE: stiffening the rear suspension" In response to Reply # 0
you always want SOME play in the rear suspension. Solid suspensions aren't the answer.
I used stock Avenger springs in my rear suspension - they're slightly longer than stock, and a good bit stiffer. Combined with KYB AGX struts, it makes for a very stiff rear end for minimal weight transfer.
of course, REAL coilovers would be a better solution for suspension tuning, but hey - $15 vs $900 .. which you you do?
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#2405, "RE: stiffening the rear suspension" In response to Reply # 1
Yes you need play in suspension. If there is no play any minor imperfection in the road surface and your rear wheels jump off the ground. Say you do this in the middle of a minor steering correction... you could be in the middle of a skid or worse when the wheels land. You want the suspension to push the tires to the ground.
#2406, "RE: stiffening the rear suspension" In response to Reply # 2
Michael, I think he was talking about something that could be put in to place at the track and removed before drving home. It could be done, it's just a matter of will it make any difference at all to the launch.
#2437, "RE: stiffening the rear suspension" In response to Reply # 4
yes, I agree, it wouldn't be safe, especially at speed if something goes wrong (and something always can and eventually does)
also, if you put some solid braces in the suspension, when the car's weight shifts the springs will expand, the suspension pieces will spread apart and the brace could fall out :o
stiff shocks and springs are the way to og, I like the avenger spring idea
Dino, do you know the difference in spring length and the lbs. ratig of the springs (compared to stock)? could you find out ?
#2440, "RE: stiffening the rear suspension" In response to Reply # 6
No idea, Todd. They're beefier springs is all i can tell you - buy a set, compare. The A/S rear is about a 1/4" taller, 1/4" bigger in diameter, and maybe ten thousandths bigger in the actual coil. I can lift myself up on my rear hatch and the suspension compresses about 1/2". It's cool.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#2495, "RE: stiffening the rear suspension" In response to Reply # 8
weld in a roll bar that'll stiffin up the body, I wouldn't worry too much about stiffening up the rear chassis there's not much there to warrant stiffening. What I've done to get my car oversteer is to get adjustable shox, thicker rear sway bar, and some crappy tires in the rear.
http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr Who sez FF can't drift?
Search
Printer-friendly copy
0 Users in Chat
