both times i launched at 3k..it was too low and bogged it, but the car is pulling like a SOB in the top end to make 15.8's..so if anyone out there would like to shed some light on me and give me some tips on the launches, I would GREATLY appreciate it.
#1819, "RE: breakdown of my slips...better but still.." In response to Reply # 0
well if your saying it boged down then jes rev it higher. you want them to spin a litte bit. but not too much. and dont drop the clutch. feather it. youl get a hang of it. what i do to practice my launches is when im at a red light i take off from idle.try not to bog the car. that gets you accuanted with he clutch. once you get good at taking off from an idle. then feathering the clutch will be easier. but thats jes how i did it. dun no if itl wurk for you.
EDIT: did that make any sence?
(im the black one)
-mitsuman 95 gs 5-spd Hrc stg 2
-mitsuman 95 GS 5-spd w/97-99 front end Repin The SoCal 2GNT'ers mitsuman95@hotmail.com AIM s/n : mitsuman95gs
#1820, "RE: breakdown of my slips...better but still.." In response to Reply # 1
Are you turbo or spraying? 15.8 would be crazy for your 60ft if your a NT. Either way u can get your 60ft's down to a 2.2-2.3 you will easily be breaking 15.5. I launch around 3500rpm but I need a new clutch. -Dave
2009 Corolla S - waiting until 2012 for my next toy! *SOLD* 1992 3000GT VR4 - pearl white and 45,6xx miles! *SOLD* 2007 Subaru Legacy GT sedan *SOLD* 95 Mitsubishi 3000GT VR4 - BPU *SOLD* 97 Eclipse GS Star Stage 2
#1821, "RE: breakdown of my slips...better but still.." In response to Reply # 0
yes (don't take this the wrong way) but those are very good 1/4 mile times with those bad 60' times. More info on your mods will help us to help you out.
#1822, "RE: breakdown of my slips...better but still.." In response to Reply # 3
here are my mods and a reason why i got the good 1/4 times with the bad 60fts.
cai greddy header bored TB UDP apexi catback centerforce clutch
and the main reason...the car was really stripped out..i'm talking all the panels, back seat, center console, passenger seat, spare tire and glove box....so the car really pulled hard in the top end...
#1823, "RE: breakdown of my slips...better but still.." In response to Reply # 4
damn I cant believe u aint spraying or turbo. If u brought your 60ft down to 2.2 like Todd or Jake you might have more of a factory freak then they got. Look out 15.5. -Dave
2009 Corolla S - waiting until 2012 for my next toy! *SOLD* 1992 3000GT VR4 - pearl white and 45,6xx miles! *SOLD* 2007 Subaru Legacy GT sedan *SOLD* 95 Mitsubishi 3000GT VR4 - BPU *SOLD* 97 Eclipse GS Star Stage 2
#1824, "RE: breakdown of my slips...better but still.." In response to Reply # 5
those are good runs for those mods with that 60' time. A better launch will easily get you into low 15.7s
and Dualgen, where do you keep getting this "factory freak" thing with my car? Maybe Jake's car, yes, but have you checked how many mods I have? Alot more than Jake for the same time! I'd say my engine is about average. the mods and launching/driving have brought those times down.
#1825, "RE: breakdown of my slips...better but still.." In response to Reply # 6
Damn. I'm jealous. 90 mph is a great trap speed especially for only those mods. I've got as much stuff as Todd and I run WAY slower. Must be those 2.8 60' times I have. hehe.
#1826, "RE: breakdown of my slips...better but still.." In response to Reply # 7
Must be the, uh <mumbles under breath> compression. -=B-= <===wiseass
Dude, Boeing called. They want their wing back.
Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate. Me: Can I put that in my sig? Dark0ne95: GO right fucking ahead.
#1828, "RE: breakdown of my slips...better but still.." In response to Reply # 9
I'm with Thura on the 160 across the board crap! ________________________________________________________________________________________ current status - unknown Project: Baby on the way http://hometown.aol.com/ohshootuhh/ www.Fast420A.com
Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...