Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 2 Users in Chat
Top 2GNT Technical Interior/Exterior Audio, Alarms, AV topic #5259
View in linear mode

Subject: "Question on popping noise" Previous topic | Next topic
DocWhiplashFeb-09-03 10:49 AM
Donating 2GNT member
880 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#5259, "Question on popping noise"




          

Well my buddy just got his stereo hooked up which consits of two 12 inch kicker solo barics(round ones) and a planet audio 1250d mono block amp. Oh yeah he also has a 1 farad capacitor but that probably isnt the problem. Well it sounds really good but if you try to turn the gain up over a quarter of the way on the amp, then one of the speakers starts to pop. He's gonna try changing out the rca wires and get better speaker wires since his are pretty small. Any ideas what causing this. TIA

95 eclipse RS

14.80 @ 94mph with no turbo

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

SPL_EclipseFeb-09-03 04:10 PM
Member since Mar 11th 2002
5921 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#5262, "RE: Question on popping noise"
In response to Reply # 0


          

when exactly does it "pop", when the amp turns on/off, all the time, on certain notes, or other times? does it sound likt the pop is a result of the signal (as a result of somthing bad with the amp or other components upsteam), or is it a mechanical sound, like the sub is the problem? if only one sub is doing it, try switching the wires between them and see if anything changes.

:shhh: i do cocaine :/shhh:

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
DocWhiplashFeb-10-03 06:46 AM
Donating 2GNT member
880 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#5272, "RE: Question on popping noise"
In response to Reply # 1




          

>when exactly does it "pop", when the amp turns on/off, all
>the time, on certain notes, or other times? does it sound likt
>the pop is a result of the signal (as a result of somthing bad
>with the amp or other components upsteam), or is it a
>mechanical sound, like the sub is the problem? if only one sub
>is doing it, try switching the wires between them and see if
>anything changes.

It Pops with the beat whenever you turn the amp gain up over a quarter of the way. It hit very hard where it's at now but as soon as you turn up the gain a little bit more, Just one of the two speakers starts popping. We replaced the rca's and the speaker wire to the amp and it's still doing it. The amp is brand new and the speakers where bought from a doctors wife that never played them hard ever. Anyone have any ideas. We took it to a shop and all they said is that it's something in the speaker. I know these speakers worked fine before. Please help

95 eclipse RS

14.80 @ 94mph with no turbo

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
SPL_EclipseFeb-10-03 09:19 AM
Member since Mar 11th 2002
5921 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#5276, "RE: Question on popping noise"
In response to Reply # 2


          

hmm... it sounds to me like the speaker is bottoming out due to excessive power. the travel of the voice coil in the magnetic gap is so great that it actually runs into the bottom of the speaker.

if the speakers are in really large sealed boxes, you could put them in smaller once to increase the "spring" of air behind them, but the sonic characteristics of the system would change as well. if they are in a ported or bandpass box, its possible that the box is not built to correct specifications. in a vented box, for example, frequencies below the tuning of the vent will cause the speaker to unload becuase theres no resistance in the box. its as if they were playing in open air.

if thats not the problem, i guess the only solution would be to keep the gains down!! LOL emoji

:shhh: i do cocaine :/shhh:

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
DocWhiplashFeb-11-03 06:00 AM
Donating 2GNT member
880 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#5289, "RE: Question on popping noise"
In response to Reply # 3




          

>hmm... it sounds to me like the speaker is bottoming out due
>to excessive power. the travel of the voice coil in the
>magnetic gap is so great that it actually runs into the bottom
>of the speaker.
>
>if the speakers are in really large sealed boxes, you could
>put them in smaller once to increase the "spring" of air
>behind them, but the sonic characteristics of the system would
>change as well. if they are in a ported or bandpass box, its
>possible that the box is not built to correct specifications.
>in a vented box, for example, frequencies below the tuning of
>the vent will cause the speaker to unload becuase theres no
>resistance in the box. its as if they were playing in open
>air.
>
>if thats not the problem, i guess the only solution would be
>to keep the gains down!! LOL emoji

Thansk for the responses. There actually in a pretty small sealed box compared to most. More than likely because the solobarics I've been told dont need as much air space. I bought the subs off a doctor who had a very High end stereo shop do the work and they made the box to exact specs for the speakers. Do you think It' could be a problem with the speaker. It hit extremely hard but just increase the gain lightly and only one starts popping. Even when it's popping they still hit extremely harder. Also do you happen to know the specs for the 12 inch round solobarics.

Thanks again

95 eclipse RS

14.80 @ 94mph with no turbo

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

                
SPL_EclipseFeb-11-03 04:34 PM
Member since Mar 11th 2002
5921 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#5297, "RE: Question on popping noise"
In response to Reply # 4


          

strange, i guess you just have a fluke or somthing. those things will take immense amounts of power without a problem in a small sealed box.

as far as specs go, i dont know them offhand, LOL, but you can probably find them at the website.

:shhh: i do cocaine :/shhh:

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Interior/Exterior Audio, Alarms, AV topic #5259 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.028 seconds, executing 26 queries.