they are in a ported box currently, and i have the options of a sealed box w/ 0.65 cubic feet/sub, or 1 cubic foot/sub...

also, one of my buddies is talkin about a bandpass box...

which one should i get????

tia

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki

Actually, if ya go to JLAudio.com, you can get recomended box setup's. We just built an Isobarik JL box, and lemme tell ya, DAYUM does it pound. Pushed by a little Pioneer amp too(for now)/no not my car. haha.. But they have some good suggestions in their "Tech" section.

Brian...

dont get a bandpass box.. they dont sound good in our cars..

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/

Yeah...Bandpass = Extremely Loud Crap

Go sealed and put about a 75-80 degree slant on your box so they aren't facing directly back but upwards slightly.

bandpass is loud and really boomy at low frequencies, but doesnt sound as clean as a sealed box.

-johnny

"Few people understand
the psychology of dealing
with a highway traffic cop.
Normal speeders will panic
and immidiately pull over to
the side. This is wrong. It
arouses content in the cop
heart. Make the bastard
chase you, he will follow..."

http://homepage.mac.com/
johnnycorona/signature/logo.jpg

-johnny

"Few people understand
the psychology of dealing
with a highway traffic cop.
Normal speeders will panic
and immidiately pull over to
the side. This is wrong. It
arouses co

thanks for your comments... now what kinda size space do i need for the subs to sound the best???

.65 or 1 cubic foot per sub???

im on the JL site, its... http://www.jlaudio.com/subwoofers/index.html

thanks fellas

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki

Well do you want to port it or seal it? If you want to seal it you go with .65...if you want to port it go with 1.0...always keep in mind your volumetric displacement of the sub when doing your calculations.