quick question im thinking about building a custom box out of wood for my 2 10" subs i want the box to take up the space just after the rear seats and down the hump and out like 8 inches with an angled front piece( i know this sounds kinda off but looking from the rear hatch you would be able to see the speakers pointing at an upward angle facing the rear glass, with this box you still have 80% use of your trunk, my question is when using wood, (cause i havent mastered glass yet) what is the best to use for the gaps and to seal all air? liquid nails? silicone? i need something that will hold up to all the vibration and pressure cause these 10s hit hard. also if anyone has a similar set up does it work out well? right now my subs are all the way to the end of my trunk facing to the rear and they sound good but my trunk is ugly? thanx in advance and i will be sure to post pics when im done.
98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.
Status:Up and running again! nice new paint
Custom stage 2 hahn turbo kit Hahn Super 16g turbo (ceramic coated) Hahn manifold (ceramic coated) Hahn Downpipe assembly Hahn intercooler piping smic Hahn oil line kit Type s bov 2G Gsx smic walbro 255 fuel pump Synapse missing link Vortech s-fmu NGK Bkr7e11 Plugs A-pillar w/boost, a/f, oil pressure gauges
#11373, "RE: building a box" In response to Reply # 0
When I made mine I used liquid nails along the faces of the wood that were touching along with screws. I also used some kind of caulk on the inside after it was built... maybe redundant sealing but it seems to be working. The box design sounds good but be careful that it will still be balanced. I tried making a box over that lip a while ago and it fit fine but seemed to be kind of top heavy and wobbled around. If you have some type of L-bracket to hold it down it should be fine though. Good luck
#11374, "RE: building a box" In response to Reply # 1
ok thanx for the feedback, i was wondering if liquid nails would hold ( i dont know why that stuff will hold anything) ill be sure to post but yes i believe i have a good system the box has to actually slide down on i cant just place it on its hard to explain but i will take pictures, needless to say theres no way its gonna tip when im done i have the base made already i just need to seal it up and make it air tight. anyone else wanna give me some feedback on this??
98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.
Status:Up and running again! nice new paint
Custom stage 2 hahn turbo kit Hahn Super 16g turbo (ceramic coated) Hahn manifold (ceramic coated) Hahn Downpipe assembly Hahn intercooler piping smic Hahn oil line kit Type s bov 2G Gsx smic walbro 255 fuel pump Synapse missing link Vortech s-fmu NGK Bkr7e11 Plugs A-pillar w/boost, a/f, oil pressure gauges
#11380, "RE: building a box" In response to Reply # 2
you dont HAVE to use liquid nails, regular elmers wood glue works great. however...make sure you have a way to secure the bottom panel (which you said is already in the car) to the rest of the box (e.i. screws). if you cant do that, then build the box with another bottom piece which can be secured to the existing panel. i like to run a bead of silicone (any kind will do) around every seam on the inside of the box. for the top baffle, you may have to use your finger to spread it around. if the subs are hefty...make sure you brace the box well. a couple 2x4s between the top baffle (where the subs are mounted) and the back baffle is perfect.
#11392, "RE: building a box" In response to Reply # 3
Update... the box is built and it fits great. i used liquid nails to seal all spaces on the outside and a silicone sealant on the inside. hooked subs up and amp tonight for a trial run and it really kicks. so far im very happy with sound quality, the bass really carries which was my main concern and the sound is great. now i need to do the finishing touches with the carpeting and tighten everything up and snap some shots, i think im gonna like this set up because it looks more appealing when the trunk is opened and it gives alot more space in the trunk for what ever i need to carry.
98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.
Status:Up and running again! nice new paint
Custom stage 2 hahn turbo kit Hahn Super 16g turbo (ceramic coated) Hahn manifold (ceramic coated) Hahn Downpipe assembly Hahn intercooler piping smic Hahn oil line kit Type s bov 2G Gsx smic walbro 255 fuel pump Synapse missing link Vortech s-fmu NGK Bkr7e11 Plugs A-pillar w/boost, a/f, oil pressure gauges
Search
Printer-friendly copy
2 Users in Chat
