ok it took me three days and a half to get my turbo installed i kept running into problems. ok last night around 7pm i finished the install. at first the car was running like crap i took the intake of and found bunched up on the turbine on the turbo those stupid ass styrofoam peanuts that the guy shipped them with. they were stuck in the intake and i thought i had gotten them all out but they got sucked in and struck n the turbin and would allow it to spin. when i removed them the car ran fine but it wouldnt gather boost like when your sitting in place and rev it up and the blow off valve is supposed to go off it didnt also i noticed that when i took the exhasut back of to get the flange welded on there was oil coming out of the exahust side of the turbo also i took the lower ic piping off and found oil in it to not a lot but it was still there keep in mind that i only had it running for like 3 mins max. the oil coming out of the exhasut side was black but the oil coming from the ic side was like brand new oil. are the seals blown because of the turbine being stuck its not spewing out but it is coming out or could it be from maybe back up from the oil drain. if it is the seals can i just rebuild it. also there is almost zero shaftplay and it is a t25. i need help asap i want to be boosting by this coming up weekend i took the turbo back off till i can finds out what it is. thanks