http://www.autosportz.com/bodykits_lambo_door_hinge_eclipse.htm

There are the doors. To hook it up the hinge takes 4 bolts that attatch to the car and 4 bolts that attatch to the door itself. Only big pain in the ass is lining up the door so that it dos't sit too much forward or back. Once you get it in the exact place where it should sit torque down the bolts on the car that secure the hinge (4) and now adjust the resting height of the hinge. There is an allen screw to do this and in the end it fits perfectly. Took about 1 hour per door. The only modifiction needed is to either cut out the lip on the inner part of the fender where the hinge goes or roll it back so the hinge can open up fully.