2GNT.com Forums - Viewing message

Interested In Advertising with 2GNT?

Printer-friendly copy

Email this topic to a friend

0 Users in Chat

Top

4G63 Technical

4G63 Tech

topic #7132

View in linear mode

Subject: "RE: idle prob"

Previous topic | Next topic

eclipseman1999	Oct-25-06 06:07 PM
Member since Jul 25th 2003 973 posts,

#7142, "RE: idle prob"
In response to In response to 9

Originally posted by eclipzGST

Originally posted by eclipseman1999

Originally posted by eclipzGST Ok, ALL of the wires from the S-AFC to the ECU harness except 2 are just tapped into uncut wires. Disconnect all of them. Then find the wires that are tapped to the cut one, disconnect the safc wires and reconnect the cut wire that's left.

ok got that. Is there a way to access the ecu better? Do the yellow plugs that have the wire connected to the ecu come out?

Yes. And yes. Take the side panels off the console, remove the bolts holding in the ECU and unplug the harnesses. They're just the regular clip-on jobs where you press down the center to release.

Alright I need your help again. I found the blue wire with the yellow stripes that was cut and had the pink wire tapped into it. I removed it and reconnected the other half back together. I cut all the other wires from the safc and it still runs like crap at idle. Do you know what color the other wire is that is suppost to be cut when connecting the safc? I looked but the only one that was actually cut that I could see was the blue with yellow stripes. Also can a bad upstream o2 sensor make it run that bad?

Shawn
99 Eclipse RS
Hahn Stage 2,Full built bottom end with je 8:8 and eagle rods ect..