|
Realize it's old thread, but more info doesn't hurt.
Originally posted by Progress
the 16g turbo on the 1g 6bolt is a pretty decent upgrade over the dinky t25 that comes stock on the 2g's, and the 1g bypass valve/BOV holds up so much better than that plastic POS that comes on the 2g... I have all of those things, minus the BOV, in pretty fair shape, and a BIG16g turbo, that is a good step up from the stock 1g turbo, that needs to be rebuilt, if you would be interested, just PM me. Everything is a direct swap and requires no tuning... Though a SAFC wouldnt be a bad thing to have to be able to tweek alittle to get it solid!
DSMs never came factory with a 16g, they either had the 14b or a 13g if it was a auto. The 1g BOV is great, but recommend either crushing it or doing the dodge garage mod if you plan to run over 17psi, though you have a GReddy BOV one so why change it? Just get new IC piping. A A/F gauge is pretty useless with the factory narrowband other than a light show, better to upgrade to a Wideband if you're going to have that gauge, plus you will need a wideband to do any real tuning.
Agreed you better keep the BOV recirculating unless either A) You're running a GM Blow through MAF or B) are running Speed Density with a MAP Sensor. Venting to Atmosphere incorrectly can result in the car running rich, poorly, or worse you flood your engine when you blow off and don't apply the gas..say when you are coming down a highway offramp, brakes don't work too well when the engine is off.
Being that he has a 99, he would need to find a 95 Eprom ECU to run DSMlink, however the 98/99 cars have flashable ECUs just like the Evos and here's the thread about it http://www.dsmtuners.com/forums/tuning-engine-management/338754-first-flashed-dsm-ecu-98-99-flashing-faq.html
Since it's a auto, never race/boost with overdrive on, you will destroy those clutchpacks in no time then be wondering why your car doesn't move.
As for the idea of swapping 1G Cams into your 2g...
From DSMtuners.com
The oem peak lift and the open close degrees (to calculate duration and total cam advance) are right in the Factory Service Manuals for these cars.
--1990-1992 turbo 5speed cams: 244 ex, 252 in
--1990-1994 turbo auto: 244 ex, 244 in
--1990-1994 n/t: 244 ex, 252 in; intake cam is advanced about 5 degrees vs. the 1990-1992 turbo 5speed, 1993-1994 turbo manual and 1995-1999
--1993-1994turbo 5pseed: 252 ex, 252 in; the intake cams have .05ish more total lift than all the other intake cams but the exhaust cam has the same lift as 1995-1999 cams
--1995-1999 all trannies: 252 ex, 252 in; same peak lift on both sides as 1990-1992 turbo 5speed, and all auto & n/t cams
All you need is a 1993-1994 intake cam to have the best dsm cam combination since you have a 2g. But you're only gaining a TINY bit more lift. You're not changing the timing or total duration even.
Tim Reed
76 Colt Galant coupe
77 Colt Galant Wagon
91 GVR4 1350/2000 (Scrapped)
99 Eclipse GS (sold)
89 Suburban 4x4
|
