#612, "I have a stock GS-T swaybar setup" In response to In response to 2
19mm front and 15mm rear w/energy suspension swaybar bushings
Front: GS-T is 19mm, GS is 18mm and RS is 16mm Rear: GS-T is 15mm, GS is 13mm and RS is the big 0mm
Do not forget to get the correct bushings for the swaybar. The front and rear swaybar bushing attachment clamps are the same for all three sizes in front and the same for the two sizes in the rear. The bushing is what is different. The larger the bar, the larger the hole in the bushing is. This also helps reduce flex in the bar.
I got my front used GS-T bar from allmitsubishi.com for $20 (included endlinks that I did not need but will probably use after this autoX season...LOL). I think a new GS-T bar from my local mitsu dealer was $45(approx) with 20% discount. If you have to mailorder it, norco mitsu has good prices.
See the post in the announcement section that has the rear drum to rear disc conversion. Now that I have completed it, our local members want to do it. I would buy the parts now if you plan on doing it in the near future.