#5544, "RE: Need your help on putting together handling stages for 2gnt" In response to In response to 21
You would in fact better benefit from thicker swaybars before springs. You will not hit the bumpstop.
You would benefit from 16"/17" wheels with good tires over 14" rims before springs as well.
This is for handling peformance so a spring upgrade making you look good has nothing to do with performance.
Just a thought.
Some of my personal ideas. Some may better but this is how I would go at. It is pretty basic and crude. There are more advanced things that could be done.
1.Tires - bigger wheels if you have 14's. RX-7 rims to save money.
2.Swaybars
3.RRE lower tie bar. If you are going to get one, this would be the most critical point. Front lower.
4.Good brake pads - not metal master
5.Struts
6.Springs - eibach pro-kit 1.3" drop
7.polyurethane bushings - get rid of that slop
8.seats - good ones
9.Quaife
10.roll cage - a stiff heavy car can outhandle a flimsy light one
11.lighten whatever you can without losing driveability
No this is not the setup of my car. It is close. I am not adamant about the roll cage and lightening yet because I want to keep its liveability so to speak.
