#32103, "RE: Broken bleeders for brakes!!!" In response to In response to 8 Mar-19-09 09:16 AM by dalesmitsu
Originally posted by Slimyjr. Good luck man. Almost all bleeders that break on calipers can't be takin out. Metal is too soft for extracter and heat will ruin the caliper seals. Best bet would be to get a bit and drill as close to the threads as possible. Then all you have to do is take out that little bit of bleeder left.
You can pick up drill-bit/ bolt extractor set for 10-20 bucks at Advance auto, look for the OEM brand red metal case, it comes with 6 bits and 6 extractors for the bits.
Bits should be reverse, I haven't had time to try them out on my broken inner fender bolts only two. The extractors should work on both yours and mine.
