#2220, "RE: HELP! Rear Swaybar touching exhuast piping!" In response to In response to 0
Hades....this is what I did....
Take some long zip ties and rap them around the rubber hangers that suspend the rear section of the exhaust. I used two ties per hanger. When you tighten the ties as tight as you can get them while pushing up on the mounts connected to the hangers, it will actually raise it up a bit. It might not seem that much but it works.....for me at least. I saw this in a Super Street mag a while back. They did it to a Subaru Imprezza because it had an oversized sway bar and 3" exhaust. Hope this helps.