i all ready tried that.. didnt work out.

allready tried these pin numbers..

#2 coil 1

#3 coil 2

#4 Generator field control

#6 Asd relay

#20 Ecu main power

#32 Crankshaft position sensor

non of these did cut the spark..

do i maybe need to connect wires together..??

the greenwire puts out a ground signal to the coil so it wont fire.. how ro connect this wire to cut the spark..??
the yellowwire is for the rpm signal i connected that to the white wire pin 73 on ecu..!!

hope o hear from you.