I have megasquirt II v3 /extra as im sure most of you have come to know :/

running RC650 injectors
Crower stage 4 cams
8.8:1 wiesco's
major port work
stock tb(deleted iac and filled in port, using stop screw)

my car is idling at 3000rpm @ 11inhg of vacuum no matter what i do.

it shows it at about dead center of the VE table when its running on tunerstudio
A/F is at about 11-12 (rich as hell i know)

today i lowered the fuel pressure as low as i could get it to roughly 32-35psi static.

that helped me lean to about 14-15 so i cant complain about that. but i have no idea what to do to get it to idle!! im going insane here.
also the gauge is reading a steady 11 so i dont think its a vacuum leak because its not fluctuating.


furthermore its running hot. has boiled over twice thinking there was air in the system i burped it today and it seems to be better, not acceptable but better. it gets to about 205 with both fans on. im pretty lost on this one too.


let me know what you think and/or if you need anymore information.

thanks alot!!!

-Jason

---------------------------------------
most posts are done from my iPhone please excuse my typos

95 eclipse gs turbo - parting out
2004- dodge dakota
2006 lancer with a fancy wing and really expensive brakes.



~Naturally Aspirated then Pressurized~
Streetworksautomotivetuning.com <~ best friend's shop SUPPORT HIM!