#2456, "RE: quick question on spark wiring" In response to In response to 0 Aug-22-06 11:55 AM by XtremeRS
Originally posted by DSMHybred I think I have this right but I want to double check. I have my MS I V2.2 all wired up except the crank sensor. So for that I go to the blue white wire off the cranks sensor on the back side of the block, to the ignition signal wire on the MS. I am currently only running fuel control so my ignition signal wire goes to the tach signal at the ecu currently.
In order to use the crank sensor for ignition control, you need to do the board mods to the tach input circuit to accept the signal from the stock crank sensor. After this, you switch the code over to the neon decoder to run fuel and spark.
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
