#2446, "RE: Can Anyone send me their ignition table for MS?" In response to In response to 2 Aug-22-06 08:03 AM by XtremeRS
Originally posted by WickedESi Heh, so is anyone running spark successfully? I'm attempting my first MSnS tune (v3 29q2) when I get off work today. This post isn't too reasuring.
I've been running spark for a long time now, with no issues..Corbin, on the outputs settings drop down, be SURE you only have spark outputs set for LED 17&19. If you have one option set to "spark output D" or something like that, it gets all screwed up. I'm going to post up a printscreen of my ignition timing table here shortly. Just be aware this is set up for 100 octane unleaded!!!!! Most of the timing values for UNDER 100 kpa should be fine for 93 octane pump. Take away roughly 2-3 degrees for boosted timing.
Also, if you are using an ignitor like the 4g63 one, set spark output inverted to "NO". If you are using the VB921's on a v3 board, set inverted to "YES".
If anyone needs anything else displayed here, just let me know..
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
