|
Sup. As I was talking to Matt in the other post and through email. I should definitely need to turn on the Basic Setting->Codebase and outputs function->Neon/420A decorder to "neon/420A" (I should have that option on in Megatune, because I connected my Tach pin to the Crank Position Sensor. not to the Tach wire. (I plan to run Spark later on)
But the problem is, whenever I turn on the Neon/420A setting, the engine won't start. I also tried after the engine started and idling smoothly, then I turn the Neon/420A decoder on and burn it to the ECU, and the car died right away.
But I did the mod in this link: http://megasquirt.sourceforge.net/extra/setup-neon.html for the v3.0 board. and I took out my MS today and double checked.
The ONLY thing I see different is, I don't have the C12 capacitor in there, because the assembly guide said don't put it in. So should I put that capacitor in to work? is there other wiring I should do?
Thanks guys.
Edit: here are the close up pictures of the input mod I made on my MS:
~~~~~~~~Modification~~~~~~~~ Performance: MegaSquirt v3.0 Fuel & Spark, 8.6:1 JE piston, Eagle Long Rods, SPEC III Clutch, EVOIII B16G, FMIC, Aeromotive 1:1 FPR, Walbro 255HP, 680cc Injectors, 2.5" DP, 3" Magnaflow Cat, 3.5" Greddy EVO CatBack, Greddy Electronic EGT,FUEL,BOOST,A/F gauges... Interior: Racing Seats, Metallic Interior, 15-Speakers System, Keyless, Dynomat Insulated, Neons... Exterior: 1999 Body with turbo wing, Halo Projector Headlight, 4300K HID, 17" Mille Rims, GSX Calipers... Coming Soon: Water Injection, Redo Undercarriage, Repaint Exterior
$240 For New Complete GSX Calipers Kit (Calipers, Bracket, Shim, Pad, Bolts, etc) Email Me If Interested!
1995 RED Eclipse GS-'T': Stage VI 20PSI 2010 Audi S5 Quattro
|