#1285, "RE: Megasquirt woes (95 PCM pinouts)" In response to In response to 9
Originally posted by DarkOne If you have an early 95 ATX, then most of the colors may be different and the pinouts will be completely wrong. I have one sitting here and it uses perhaps 1/3 of the pins in the 60-pin connector, whereas most later 95's use more than half. The early 95's are a strange lot.
I have an early model MTX, but yes, the pinouts and colors are very wrong . Wasn't to difficult to trace them, just a lot of extra time/effort and a bit of confusion when first starting. I've got all my wiring done for the fuel side of things, and only a few things left for ignition, but a correct wiring diagram would be great to have so I can make sure I didn't tap something from the wrong spot .
. Wasn't to difficult to trace them, just a lot of extra time/effort and a bit of confusion when first starting. I've got all my wiring done for the fuel side of things, and only a few things left for ignition, but a correct wiring diagram would be great to have so I can make sure I didn't tap something from the wrong spot 
