>Hey fast420a, question for ya about your post. I have heard
>that the ECU advnaces timing hella lot, thus negating the
>use of NOS or turbo. If you use an after market ignition
>with timing retard, arent you canceling out the gains from
>the ECU by retarding the timing, essentialy making it a
>stock or close to stock ECU with a higher rev limit?

I had this conversation with Mur1x a month or so back, so maybe I can help clarify why it's may be a good investment:

The advanced timing would make NOS or turbo dangerous, but you have to remember that turbo's don't spool until 3000 rpm, and NOS isn't activated until around then either.

So the timing advanced would help from 1000-3000 which would help you build boost quicker, help you get off the line faster, and let you hit the n2o a fraction earlier.

Then, something like a MSD-2 can be used to retard timing back to normal levels at the higher RPMs to prevent detonation (like Fast420a already said). You would have the best of both worlds!

Plus, revving to 8k is kool.

16.1 @ 87.11
http://www.virtuallyinfamous.com

ARD 57mm tb and p&p manifold, Neuspeed STB, Pro-kits, Illuminas, Injen CAI with K&N, 2.5" pacesetter catback,
AF/X UDP, Rear STB, Powerslot rotors, RRE SS Brakelines.