#137837, "RE: New Head Gasket, Same Old Smoke" In response to In response to 11
Originally posted by Socal420aT you need to do a few tests before throwing more parts at the car. I would do a Block test first to see if there is any HC in the coolant then from there a pressure test on the cooling system then a leak down test. original It was sounding like valve stem seals but if your pushing coolant out the back you have bigger problems than that, you said it overheated before? how hot did it get?
Well I bought the car with the problem so I don't know how hot it could have got with the previous owner. However, she had a nearly all highway commute and the car didn't heat up too fast so I doubt it got too hot. When I've owned the car, the needle only creeped up past 1/2 way twice, both times for just a minute or two.
And when I drained the oil and coolant the first time, they both looked normal. The coolant jug definitely had no signs of oil contamination.
