Ok, well the guy on cardomain got back to me and this is what he said:

It's really easy to turn off the egr cel. Go to radioshack and get this resistor (Model: 271-135), it's $1.99 for a pack of 2. Then all you have to do is connect the resistor in line with the wires. I ended up chopping my egr solenoid apart because I wanted it to be a clean install.

If you just chop the egr solenoid apart like I did all you have to do is get to the 2 prongs leading past the plug on the other side. Then take your soldering iron and tin the wires on that side, you can also melt the plastic within that side of the plug. Bend the two wires from the resistor so they come out and form 2 prongs, then just solder those to the ones on the solenoid plug. Take a multimeter and check for continuity, you should have about 100ohms of resistance. Then cover the connections in hot glue and wrap it in electrical tape.

You should have something like this when you're finished


I was pretty amazed how well it worked to tell you the truth.