#116420, "RE: Convert Rubber fuel supply line hose from Fuel Pump to SS?" In response to In response to 0
The top of the fuel pump is 5/16 which translates to -5AN. YOu have a 95 i see (based on the fuel pump bracket). You have only a couple options.
1. Order a factory rubber line.
2. Cut off the crimped sleeve and use the hose-end as a barb and clamp whatever hose you want. So far I have not been able to find a fitting like that to make it a simple bolt on affair for AN fittings. I have made adapters but I dont like the bulkiness of the setup.
3. Find a 96+ fuel pump bracket, cut the end off and double flare it with a tube sleeve and -5AN nut. You will need a -5AN/-6AN union and then you can run -6AN stainless from that. You will need a Banjo for the other end by the fuel filter. If you dont have the tools to flare the line on the fuel pump hanger, send it to me and I will do it for you for nothin. I used the have spare already done but the ass i sent it to never sent me a stocker back to setup.
