#103496, "RE: HELP With misfire...anyone near Bristol,TN?" In response to In response to 11
ok i found "A" prob i dont know if its "THE" prob tho..
started the car up and the mis was gone for a few revs then it came back. popped off #1 wire and it ran like ass. popped off #2 wire not much of a change. popped off #3 wire not much of a change. popped off #4 wire and it ran like ass.
now at this point i figured yeap its the coil but after messing with the #2-3 wires the mis went away for a few revs.so i took those off again and this time on #3 it started popped and aching and after checking it over the shaft that goes into the cyl has holes in it,not really a crack or break more like archin happing on the inside and over time has ate at the shaft.
also i found some oil in cyl #1 and 2.not a flood or any standing more like a drop or 2 just enough to coat the tip of the shaft.i checked to see if any oil was running into the cyl while running and didn't see any.. _______________________________________ Parts im Looking for.
Leather seats,Hood,Hatch,Black apillars,black door sills,floor mats,CF gauge cluster cover,chrome gauge cluster trim rings