Okay, i just recently dropped a 98 motor and tranny into a 95 Eclipse.

OBD2 --> OBD1


Everything is hooked up except for the following.

I goto start the car and I get nothing. not even a turn over.

The battery has plenty of juice.


Okay, Asfar as the motor goes, all the sensors have been swapped and are now hooked up to the 95 harness.


But I have a problem with the trany.

There is one rather large plug that does not come on the 95 harness.

Here it is: remember, (this is a 98 tranny)



Its the 2nd biggest plug on the tranny.

Here are the 2 plugs left overon the 95 harness:






what are my options?

i was thinking mabey i can get that plug from a OBD2 harness and rewire the 95 harness using that OBD2 plug.

But I'm not sire what sensors I'm fucking with.


can you tranny experts help me out please before I pull my hair out and burn the fucking car to the ground.

thank you

PS: Here are some pics and details from the swap:


http://www.southfloridaracing.com/forums/showthread.php?t=27633




-DegreE

<--This is our god... god decides our fate. We shall not upset our god. God can and will ruin our lives if we were to upset him.

OBX 4-1 Ceramic Coated Headder, EGR Block-off kit, Howell 30% Underdrive pulley, EBay Cold-Air Intake, Holley Air Mass CatBack Exhaust System: 2.5" pipe w/ 5" tip