ive heard of people running wires through the steering boot, but that always scares me, lol. if you do a search here, im sure youll find some more info. congrats on not wanting to run the power and signal lines together though

the order should go like this (make sure the amps body isnt grounded):

1) connect the positive power wire to the amp
2) connect the positive wire to the battery
3) connect the remote turn on lead to the amp
4) connect the ground wire to the amp (make sure the other end isnt grounded while doing this)
5) connect the amp ground to the ground point on the vehical (you might notice a spark or two)

now stop, and turn on your headunit. check to see if the amp turns on. if it does, you know your power connections are ok. of not, check the grounding point, and use a multimeter to make sure the power wire is supplying current from the battery.

6) connect all the signal wires (the RCAs from the headunit and the speakr wires). no real order here.

:shhh: i do cocaine :/shhh: