yep.. I posted that you have to get to the piece up under the glass. Get the glass out (6 torx screws from inside) and slide the rails back with the button. there's one piece about 1/2 way back that screws in outside the rails and has a little nub that hangs over the rail. Mine is loose and I've tightened the screw as tight as it will go and still no good. so, here's what I did. I found a small thick plastic washer and put the washer on the screw and then put the screw back through the mount and into the roof. It holds it much tighter now. I only had to do it to one side, but you might have to do it to both. The sunroof really isn't too complicated. Just remember where the screws came from and dig into it.