Hello everyone, I could really use some help on this today. I am working on my car changing out the stock injectors and placing in 30# Accell injectors. I went to put the 2.72” disk in my regulator and I think I have a problem. It seems to me that the ring does not fit around the disk correctly. Hopefully you guys will be able to tell me if this is how it’s supposed to be.

http://imageshack.us>

The 2.47” disk and ring fit perfectly and the 2.22” disk and ring also are a perfect fit. I don’t know what my problem seems to be here. Is this a custom ring for a slightly larger disk? I don’t know why they don’t fit right. Surely that’s not how they are supposed to fit, but I want your confirmation.

I was wondering if it would be ok to use the 2.47" disk. It probably wouldn’t be a good idea, maybe too lean, but I thought I would check.

I am boosting up to 9 psi and my fuel pressures with the 3.62 disk are way too high. This fuel line from the pump is badly cracked and looks as if it is about to fail. However, i think it could also be a virbration problem.
http://imageshack.us>

Thanks.
.

Ryan Siefring
Located near Dayton OH, zip 45356
Student at the University of Dayton.

i think theres supposed to be a lil play with the 2.72 . your fuel pressure shouldnt be too high tho with the largest disk . i can get mine down to 15 . i have it set at 21psi at idle with the bleed valve almost all the way out and its almost perfect .

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

Ok, thanks, These's probably .125" play on the disk, but i guess it makes some sence.

I think you misunderstood me about the fuel pressures, I was talking about my stock injectors at max boost witht he 3.62" disc. When i hit 9PSI i max out my fuel pressure gauge. It's max preasure it goes to is 100 psi. I've already blown off fuel lines, i neeed to fix these problems.

Ryan Siefring
Located near Dayton OH, zip 45356
Student at the University of Dayton.

I just asked the same question myself a few weeks back, but nobody ever offered and answer. For some reason that I don't understand that's just the way it's supposed to be. Here's my thread:

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=95479&mesg_id=95479&page=2

1999 Eclipse GST 4G63