Ok it's like this. Just installed Jaw wideband (14point7.com), and i used power wire from cigarette lighter (blue). Everything works fine till i turn the headlights on, then the wideband shuts down, it's loosing power somehow, but as soon as headlights are turned off it works fine again. What could it be. Any ideas? Thx
#104484, "RE: electrical problem" In response to Reply # 0
I think you used the illumination wire, not 12v from the battery
Erik P. Official 2GNT thread Hijacker Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be... All we know is, He's not The Stig... But he is The Stig's Spartan cousin!
#104490, "RE: electrical problem" In response to Reply # 3
You can get a fuse piggy back power so that when you turn it on it will turn on. All the auto parts stores sells them. You'll just have to find a fuse that is active when you turn the ignition on and inactive when it is off.
#104494, "RE: electrical problem" In response to Reply # 4 Mar-20-10 04:31 PM by gsgoingT
Originally posted by whtclipse98 You can get a fuse piggy back power so that when you turn it on it will turn on. All the auto parts stores sells them. You'll just have to find a fuse that is active when you turn the ignition on and inactive when it is off.
Sorry for being n##b but how do i tell which fuse is that. Also how would i wire that, any diagrams for it. n##b thanks you. About toggle switch, the guy who makes these doesn't recommend that. It should be wired so when you turn your key to "ON" position wideband turns on.
#104498, "RE: electrical problem" In response to Reply # 6
Look in your owners manual if you have it. You can either use the ignition fuse under the hood or you can use the gauge or radio ruse under the dash. The wiring is easy, just buy the tap kit, pull whatever fuse you are going to use, hook the fuse tap kit to the power wire for whatever you are wanting power for, insert this tap kit into the fuse location, reinstall the fuse into that tap kit and make sure there is a fuse in the tap kit for what you are about to power and thats it.