#333, "I certainly don't know the "why"..." In response to Reply # 0
Without actually asking him, but I'll venture some guesses.
I think it probably involves a design choice really. Whoever designed the kit(Wyatt knows him) made the call to worry about a vacuum return to the back of the car rather than the fuel return line. Also, with the absence of a fuel return in 96+ cars, he must have just thought it would be unfeasible or rather uneasy to find a way to tap into the fuel rail in order to make the fuel return line. Maybe HRC was lucky enough to come to the realization of usign the service fitting on the fuel rail in order to include a fuel return line. Using the FMU in the back of the car, you stay much "closer" within the constructs of the stock fuel system, only adding the vacuum line to the back of the car. An "addition" as opposed to almost a complete alteration to the stock fuel system.
There's my guess. I think it's reasonable,but maybe just a bit more risky though. Vacuum lines are so much more touchy than are fuel lines.
Jason 98' Eagle Talon ESi-T Mitsu Super 16g Turbo(HRC)
Jason, thanks for you response.. That was my first impression, that on the 96+ cars it would be easier just to put the fmu in the back.. but i just wanted someone to confirm that the 96+ do in fact run only a single fuel line (pressure)..
#336, "RE: STAR fuel question..." In response to Reply # 3
Yeah Saber...
I think he meant that. Relatively speaking, in 96+ cars, the fuel pump, in the tank, is "near" the stock FPR right in front of the fuel tank, by the fuel filter.
I like to be specific too, though.
Jason 98' Eagle Talon ESi-T Mitsu Super 16g Turbo(HRC)
Basically, the FMU needs to be put downstream of the fuel pressure regulator. The 96+ 420a's have the regulator at the back fo the car by the fuel tank, so, the FMU need to be put in line with the return line to raise line pressure. The 95 Fuel systems ahev the regulator directly on the fuel rail, so the FMU is located in the engine bay. If you have a 96+ 420a, and want to put the FMU in the engine bay, that will require either moving the regulator to the engine bay and routign it from the stock regulator to the new FMU. Anotehr option is to replace the Stock regulator with an adjustable FMU so you can set your own idle fuel pressure. I woul deither get the Vortech fully adjustable FMU or the Bell Engineering Adj FMU if you are interested in that.
#340, "RE: Star Fuel System" In response to Reply # 7
Thanks for the response guys !! =)
The reason why i was asking was because when i did my turbo system i thought about doing that but i wasnt sure if it would work. So what i did was i bought a used 95 eclipse fuel rail which has the stock fpr mounted on it, and i ran a fuel return line to the tank.
I was just wondering how "EFFECTIVE" it is to put the FMU in the back were the stock fpr is ?? would it be absolutely the same as say having the fmu mounted in the engine bay next to the fuel rail fpr ?? the reaon i ask this is running a super long vacuum line may throw off the boost reading ! any thoughts on that ??
#341, "I thought so too but...." In response to Reply # 8
On my latest test I ran about 95psi of fuel pressure @ about 5.5psi of boost. I'm thinking thats a lot of fuel, not to mention my O2 sensor is reading somewhere along the lines of .94-.96v (super rich).So My thinking of the FMU seeing less boost than right at the fuel rail went right out the window. The ONLY reason I would feel more comfortable having the FMU in the engine bay is so you don't have a 6ft vacuume line going to the back of the car. But, I have't had any problems with that. Also, if you get an adjustable FMU, your goin gto want it in the engine bay anyway so you can change fuel pressure ratio.