#108979, "PCV valve sucks" Sep-28-11 08:06 AM by 420agreenvilleSC
So apparently my PCV valve has been bad for quite some time now. Under normal driving, idling and vaccum all the way up to atmospheric has been fine, but once under boost the crankcase has been getting pressurized due to a crapped out PCV.
I know our PCV valves aren't designed to be used for boosted applications and have read that some are using a 4g63 "threaded" PCV which works a little better. I want to keep this from happening again (as much as I can), so here are my questions/options:
1. forget about it and throw on another stock PCV valve? 2. get some type of performance check valve and retrofit it? 3. purchase a 4g63 PCV, mod and use it?
i also read in a previous thread that dino was/is running a brake booster vacuum resovoir check valve, which would definately prevent any leaks and last much longer. anyway, thoughts/suggestions are encouraged. thankz youz guyz
current setup: boosted (obviously) standard PCV setup crankcase evac system hosed to downpipe
Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim
#108980, "RE: PCV valve sucks" In response to Reply # 0
I dont run a PCV valve for this reason. Just a hose dumping to the ground for now, planning on routing it to a catch can soon. Mine always leaked under boost and would shoot oil out the breather. I got tired of cleaning oil off everything
#108981, "RE: PCV valve sucks" In response to Reply # 1
I do the same as Silver. I run a Road Race Engineering catch can that has dual inlets and a breather filter on top. I run lines from both VC nipples to the can and drain it every oil change.
On a boosted application, IMO, that is the best way to do it.
1999 Eclipse GS Built motor Hahn 16G Turbo w/ FMIC Hahn Stage 5 Portfueler (270's & 500's) Zeitronix Zt-2 wideband w/ 3.5bar MAP 3" SS Turbo Back CM Stage 4 Clutch and Fidanza Flywheel Baer Big Brake Kit
#108982, "RE: PCV valve sucks" In response to Reply # 0
Originally posted by 420agreenvilleSC i also read in a previous thread that dino was/is running a brake booster vacuum resovoir check valve, which would definately prevent any leaks and last much longer.
$2 in the HELP! section at AZ...
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#109043, "RE: PCV valve sucks" In response to Reply # 3 Oct-28-11 05:45 PM by bagged420a
Originally posted by DarkOne
Originally posted by 420agreenvilleSC i also read in a previous thread that dino was/is running a brake booster vacuum resovoir check valve, which would definately prevent any leaks and last much longer.
$2 in the HELP! section at AZ...
When doing this, do you just replace the stock pcv valve and put this in its location?